Cryosub power converter top v03
uob-hep-cad·cryosub·hardware/uob-hep-pc068a-cryosub/cryosub_power_converter_top_v03/cryosub_power_converter_top_v03.kicad_pcb
About the Cryosub power converter top v03 PCB
Cryosub power converter top v03 is an open source PCB design by uob-hep-cad, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 34 × 45 mm, with 56 components from 27 distinct parts.
Other key parts include the LT3042xMSE, LTC3129IMSE-1-PBF and MAX15059BETE+T. By type, the board carries 20 resistors, 18 capacitors, 5 inductors, 3 ICs, 3 transistors and 3 diodes.
From the project
Design information for DUNE vertical drift readout of photon detectors over fibre ( cryo submarine )
git clone --recurse-submodules https://github.com/uob-hep-cad/cryosub.git
There are Python scripts that control the power to the "power over wires and a heating resistor" Cryosub and acquire temperature data located in the Scripts subdirectory.
There are three python processes that should be run in parallel
CryosubLoop.py - loops round reading demand values from database and writing to PSU. Measures actual values from PSU and the temperature
Main components on the Cryosub power converter top v03
Cryosub power converter top v03 bill of materials (BOM)
56 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT3042xMSE | MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm | U1 |
| 1 | LTC3129IMSE-1-PBF | LTC3129EMSE-1-PBF | U2 |
| 1 | MAX15059BETE+T MAX15059BATE+ | MAX15059BATE&plus_ | U3 |
| 2 | IRLML2803 IRLML2803PBF | SOT-23 | Q1, Q2 |
| 1 | SIS407DN-T1-GE3 SiS407DN | Vishay_PowerPAK_1212-8_Single | Q3 |
| 1 | CONN_02X04_ODD_EVEN Conn_02x04_Odd_Even | IDC-Header_2x04_P2.54mm_Vertical | J1 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinSocket_2x05_P2.54mm_Vertical_SMD | J2 |
| 1 | TestPoint | TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1 |
| 1 | TESTPOINT_2POLE TestPoint_2Pole | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | TP2 |
| 3 | MBR0580 | D_SOD-123 | D1, D2, D3 |
| 3 | 1.0UH 1.0uH | L_0603_1608Metric | L1, L3, L5 |
| 1 | 4.7uH,WE-TPC,744025004 | Wuerth_Elektronik-744025004-Manufacturer_Recommended | L2 |
| 1 | 4.7uF,WE-TPC,744025004 | Wuerth_Elektronik-744025004-Manufacturer_Recommended | L4 |
| 5 | 0603-100NF-50V 100nF | C_0603_1608Metric | C1, C15, C16, C17, C18 |
| 5 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C8, C12 |
| 3 | 0603-22NF-50V 22nF | C_0603_1608Metric | C5, C10, C11 |
| 5 | 0603-2.2UF-16V 2.2uF | C_0603_1608Metric | C6, C7, C9, C13, C14 |
| 1 | 49.9K 49.9k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 4 | 0603-100K 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R9, R12 |
| 2 | 0603-4K7 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R8 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0603-200K 200k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R7 |
| 2 | 0603-1K 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R10 |
| 1 | 0603-330K 330k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 5 | 0603-10K 10k | R_0603_1608Metric | R13, R15, R17, R18, R19 |
| 1 | 0603-120K 120k | R_0603_1608Metric | R14 |
| 1 | 0603-360K 360k | R_0603_1608Metric | R16 |
| 1 | 0603-100R 100 | R_0603_1608Metric | R20 |
Cryosub power converter top v03 design files
The KiCad project lives in the uob-hep-cad/cryosub repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/uob-hep-pc068a-cryosub/cryosub_power_converter_top_v03/cryosub_power_converter_top_v03.kicad_pcb
- Schematichardware/uob-hep-pc068a-cryosub/cryosub_power_converter_top_v03/cryosub_power_converter_top_v03.kicad_sch
- BOMhardware/uob-hep-pc068a-cryosub/cryosub_power_converter_top_v03/cryosub_power_converter_top_bom_v03.xlsx
Cryosub power converter top v03: common questions
How big is the Cryosub power converter top v03 PCB?
The Cryosub power converter top v03 measures 34 × 45 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Cryosub power converter top v03?
56 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cryosub power converter top v03 design files?
From the uob-hep-cad/cryosub repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Cryosub power converter top v03 design in my own project?
Yes, under the terms of its GPL-3.0 license, which uob-hep-cad chose for the repository.
More boards in cryosub
Earlier revisions in the repo: cryosub_power_converter_top_v02, cryosub_power_converter_top_v01