Cryosub power converter warm cold v01-voltar.phy.bris.ac.uk
uob-hep-cad·cryosub·hardware/uob-hep-pc068a-cryosub/cryosub_power_converter_warm_cold_v01/cryosub_power_converter_warm_cold_v01-voltar.phy.bris.ac.uk.kicad_pcb
About the Cryosub power converter warm cold v01-voltar.phy.bris.ac.uk PCB
Cryosub power converter warm cold v01-voltar.phy.bris.ac.uk is an open source PCB design by uob-hep-cad, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 34 × 45 mm, with 26 components from 25 distinct parts.
Other key parts include the LT3042xMSE. By type, the board carries 10 resistors, 6 capacitors, 3 transistors, 3 connectors, 3 diodes and 1 IC.
From the project
Design information for DUNE vertical drift readout of photon detectors over fibre ( cryo submarine )
git clone --recurse-submodules https://github.com/uob-hep-cad/cryosub.git
There are Python scripts that control the power to the "power over wires and a heating resistor" Cryosub and acquire temperature data located in the Scripts subdirectory.
There are three python processes that should be run in parallel
CryosubLoop.py - loops round reading demand values from database and writing to PSU. Measures actual values from PSU and the temperature
Main components on the Cryosub power converter warm cold v01-voltar.phy.bris.ac.uk
Cryosub power converter warm cold v01-voltar.phy.bris.ac.uk bill of materials (BOM)
26 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT3042xMSE | MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm | U1 |
| 2 | IRLML2402TRPBF IRLML2402TR | SOT-23 | Q1, Q2 |
| 1 | AOD413A FDD306P | TO-252-3_TabPin2 | Q3 |
| 1 | CONN_02X04_ODD_EVEN Conn_01x02_Male | PhoenixContact_MCV_1,5_2-G-3.81_1x02_P3.81mm_Vertical | J1 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical_SMD | J2 |
| 1 | Conn_01x02_Male | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J3 |
| 1 | MBR0580 B120-E3 | D_SMA | D1 |
| 1 | MBR0580 PTZTFTE255.6B | D_SMA | D2 |
| 1 | MBR0580 PTZTFTE2510B | D_SMA | D3 |
| 1 | 0603-100NF-50V 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 30nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 0.47uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 0603-22NF-50V 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 0603-2.2UF-16V 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 49.9K 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 0603-100K 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 0603-100K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 0603-4K7 200k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 0603-200K 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0603-1K 200k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 0603-200K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 0603-4K7 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 0603-100K 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 0603-1K 49.9k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
Cryosub power converter warm cold v01-voltar.phy.bris.ac.uk design files
The KiCad project lives in the uob-hep-cad/cryosub repository on GitHub; these links point at the commit this page was built from.
Cryosub power converter warm cold v01-voltar.phy.bris.ac.uk: common questions
How big is the Cryosub power converter warm cold v01-voltar.phy.bris.ac.uk PCB?
The Cryosub power converter warm cold v01-voltar.phy.bris.ac.uk measures 34 × 45 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Cryosub power converter warm cold v01-voltar.phy.bris.ac.uk?
26 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cryosub power converter warm cold v01-voltar.phy.bris.ac.uk design files?
From the uob-hep-cad/cryosub repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Cryosub power converter warm cold v01-voltar.phy.bris.ac.uk design in my own project?
Yes, under the terms of its GPL-3.0 license, which uob-hep-cad chose for the repository.