M5AtomLoraShield
Uspizig·M5AtomLoraShield·atomMiniLora/atomMiniLora.kicad_pcb
About the M5AtomLoraShield PCB
M5AtomLoraShield is an open source PCB design by Uspizig, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 24 × 24 mm, with 13 components from 7 distinct parts.
By type, the board carries 4 diodes, 4 resistors, 2 connectors and 2 capacitors.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
From the project
Lora Shield for M5Atom
In the Attached folder you may see 1. Schematic(PDF) 2. Gerber Files(Zip File) 3. Changes in the SW for https://github.com/mcci-catena/arduino-lmic
You may change the following lines in the SW of Arduino-LMIC: To do this Change in the folder Arduino\libraries\arduino-lmic-master\src\hal the File hal.cpp the function "static void halspiinit to": static void halspiinit () { //SPI.begin();//Comment Uspizig Original und WEMOS D1 //SPI.begin(lmicpins.sck, lmicpins.miso, lmicpins.mosi, lmicpins_cs); //sck, miso, mosi, cs SPI.begin(23, 22, 19, 33);//Comment Uspizig M5Matrix Lora Modul }
M5AtomLoraShield bill of materials (BOM)
13 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x05_Male | PinHeader_1x05_P2.54mm_Vertical_SMD_Pin1Left | J1 |
| 1 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | RFM95W-868S2 | HOPERF_RFM9XW_SMD | RFM95 |
| 3 | MBR0530 | D_SOD-123 | D1, D2, D3 |
| 1 | LED | LED_0805_2012Metric | D4 |
| 2 | C | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 4 | R | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4 |
M5AtomLoraShield design files
The KiCad project lives in the Uspizig/M5AtomLoraShield repository on GitHub; these links point at the commit this page was built from.
M5AtomLoraShield: common questions
How big is the M5AtomLoraShield PCB?
The M5AtomLoraShield measures 24 × 24 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the M5AtomLoraShield?
13 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the M5AtomLoraShield design files?
From the Uspizig/M5AtomLoraShield repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the M5AtomLoraShield design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979