People-Staff-Neo

utahsaint-org·MiniBadges2024·People-Staff-Neo/People-Staff-Neo.kicad_pcb

People-Staff-Neo PCB layout, top view — open source AVR/Arduino board by utahsaint-org

About the People-Staff-Neo PCB

People-Staff-Neo is an open source AVR/Arduino PCB design by utahsaint-org, published on GitHub. It is a 4-layer board measuring 20 × 20 mm, with 84 components from 5 distinct parts.

Its main chip is the ATtiny1614-SS, from the AVR/Arduino family.

From the project

Minibadges for SAINTCON 2024

People-Staff-Neo bill of materials (BOM)

84 components, 5 distinct parts.

QtyPartRefs
1
R_US
4.7kΩ
1
C
10uF
1
ATtiny1614-SS
ATTINY1614
1
MiniBadge_Full
MB1
80
~
N1, N2, N3, N4, N5, N6, N7, N8 +72

People-Staff-Neo design files

The KiCad project lives in the utahsaint-org/MiniBadges2024 repository on GitHub; these links point at the commit this page was built from.

People-Staff-Neo: common questions

What microcontroller does the People-Staff-Neo use?

The People-Staff-Neo is built around the ATtiny1614-SS, from the AVR/Arduino family.

How big is the People-Staff-Neo PCB?

The People-Staff-Neo measures 20 × 20 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the People-Staff-Neo?

84 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the People-Staff-Neo design files?

From the utahsaint-org/MiniBadges2024 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the People-Staff-Neo design in my own project?

The repository has no license, so all rights stay with utahsaint-org. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the People-Staff-Neo without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in MiniBadges2024

Similar boards