2023-KidsNight

utahsaint-org·MiniBadges2024·KidsNight-Badge-2024/2023-KidsNight.kicad_pcb

2023-KidsNight PCB layout, top view — open source AVR/Arduino board by utahsaint-org

About the 2023-KidsNight PCB

2023-KidsNight is an open source AVR/Arduino PCB design by utahsaint-org, published on GitHub. It is a 2-layer board measuring 79.6 × 112.3 mm, with 7 components from 4 distinct parts.

Its main chip is the ATtiny85-20P, from the AVR/Arduino family. By type, the board carries 3 diodes, 1 IC and 1 battery holder.

From the project

Minibadges for SAINTCON 2024

Main components on the 2023-KidsNight

2023-KidsNight bill of materials (BOM)

7 components, 4 distinct parts.

QtyPartRefs
1
ATtiny85-20P
U1
1
Battery
BT1
2
MiniBadge_Full
MB1, MB2
3
LED
D1, D2, D3

2023-KidsNight design files

The KiCad project lives in the utahsaint-org/MiniBadges2024 repository on GitHub; these links point at the commit this page was built from.

2023-KidsNight: common questions

What microcontroller does the 2023-KidsNight use?

The 2023-KidsNight is built around the ATtiny85-20P, from the AVR/Arduino family.

How big is the 2023-KidsNight PCB?

The 2023-KidsNight measures 79.6 × 112.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 2023-KidsNight?

7 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the 2023-KidsNight design files?

From the utahsaint-org/MiniBadges2024 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 2023-KidsNight design in my own project?

The repository has no license, so all rights stay with utahsaint-org. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 2023-KidsNight without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in MiniBadges2024

Similar boards