IMACS Keyboard
About the IMACS Keyboard PCB
IMACS Keyboard is an open source PCB design by UWARG, published on GitHub. It is a 2-layer board measuring 321.5 × 116.7 mm, with 123 components from 16 distinct parts.
Other key parts include the SC0915 and Keyswitch. By type, the board carries 61 diodes, 2 ICs, 2 modules, 2 crystals, 2 connectors and 1 transistor.
It belongs with the robotics & motion and keyboards designs in this gallery.
From the project
PCB designs for the Waterloo Aerial Robotics Group
Main components on the IMACS Keyboard
IMACS Keyboard bill of materials (BOM)
123 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SC0915 | MODULE_SC0915 | U1 |
| 1 | Keyswitch | MX_PCB_1.00u | U2 |
| 2 | Keyswitch | MX_PCB_1.00u | A1, M1 |
| 1 | Keyswitch | MX_PCB_1.00u | Q1 |
| 2 | Keyswitch | MX_PCB_1.00u | X1, Y1 |
| 2 | Keyswitch | MX_PCB_1.00u | J1, P1 |
| 45 | Keyswitch | MX_PCB_1.00u | B1, BKSLSH1, BKSP1, BRKT_C1, BRKT_O1, CAPS1, COLON1, D_KEY1 +37 |
| 1 | Keyswitch | MX_PCB_1.00u | F1 |
| 1 | Keyswitch | MX_PCB_1.00u | H1 |
| 1 | Keyswitch | MX_PCB_1.00u | K1 |
| 1 | Keyswitch | MX_PCB_1.00u | S1 |
| 1 | Keyswitch | MX_PCB_1.00u | T1 |
| 61 | Diode | Diode_DO-35 | D1, D2, D3, D4, D5, D6, D7, D8 +53 |
| 1 | Keyswitch | MX_PCB_1.00u | L1 |
| 1 | Keyswitch | MX_PCB_1.00u | C1 |
| 1 | Keyswitch | MX_PCB_1.00u | R1 |
IMACS Keyboard design files
The KiCad project lives in the UWARG/hardware repository on GitHub; these links point at the commit this page was built from.
IMACS Keyboard: common questions
How big is the IMACS Keyboard PCB?
The IMACS Keyboard measures 321.5 × 116.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IMACS Keyboard?
123 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IMACS Keyboard design files?
From the UWARG/hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IMACS Keyboard design in my own project?
The repository has no license, so all rights stay with UWARG. Use it as a reference, and ask the author before reusing the design.
More boards in hardware
Similar boards
Lily58 Pro BOTTOM
kata0510
142.5 × 106.3 mm5 parts2LMIT2.3k
Lily58
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Pro
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Lite Rev3 TOP Case
142.5 × 106.4 mm34 parts2LMIT2.3k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k