Arduino Tracking Antenna
UWARG·hardware·Projects/Arduino_AAT/Arduino_AAT.kicad_pcb
About the Arduino Tracking Antenna PCB
Arduino Tracking Antenna is an open source PCB design by UWARG, published on GitHub. It is a 2-layer board measuring 53.1 × 66.6 mm, with 41 components from 25 distinct parts.
Other key parts include the SeeeduinoXIAO, AS7805ADTR-G1, TPS563201DDCR, PA6H-GPS and MIC5504-3.3YM5. By type, the board carries 13 capacitors, 12 resistors, 7 ICs, 2 connectors, 2 inductors and 1 battery holder.
It belongs with the robotics & motion and rf & radio designs in this gallery.
From the project
PCB designs for the Waterloo Aerial Robotics Group
Main components on the Arduino Tracking Antenna
Arduino Tracking Antenna bill of materials (BOM)
41 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SeeeduinoXIAO | Seeeduino XIAO-MOUDLE14P-2.54-21X17.8MM | U1 |
| 1 | AS7805ADTR-G1 | DPAK457P1010X238-3N | U2 |
| 2 | TPS563201DDCR | SOT95P280X110-6N | U3, U4 |
| 1 | PA6H-GPS | PA6H-GPS | U5 |
| 1 | MIC5504-3.3YM5 | SOT-23-5 | U6 |
| 1 | FT230XS-R INTERFACE-FT230XS-R_SSOP16_ | SSOP16-0.635-5X4MM | U7 |
| 1 | XT30PW-M | AMASS_XT30PW-M | J1 |
| 1 | USB-A1HSW6 | OST_USB-A1HSW6 | P1 |
| 1 | Battery_Cell | BH-98R-1_ADM | BT1 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | PITCH1, YAW1 |
| 1 | COM-16347 | COM-16347_SPK | LED1 |
| 1 | 1N4148TR | DIOAD753W49L380D172B | D1 |
| 2 | 3.3uF | L_1210_3225Metric | L1, L2 |
| 1 | 220uF | CAP_YX_6P3X11_RUB | C1 |
| 2 | 47pF | C_1206_3216Metric | C2, C3 |
| 1 | 100nF | C_1206_3216Metric | C4 |
| 2 | 47uF | C_1206_3216Metric | C5, C6 |
| 2 | 0.1uF | C_1206_3216Metric | C7, C10 |
| 4 | 22uF | C_1206_3216Metric | C8, C9, C11, C12 |
| 1 | 1uF | C_1206_3216Metric | C13 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 27R | R_1206_3216Metric | R1, R2 |
| 1 | 4k7 | R_1206_3216Metric | R3 |
| 5 | 10k | R_1206_3216Metric | R4, R7, R8, R10, R12 |
| 2 | 220R | R_1206_3216Metric | R5, R6 |
| 2 | 54.9k | R_1206_3216Metric | R9, R11 |
Arduino Tracking Antenna design files
The KiCad project lives in the UWARG/hardware repository on GitHub; these links point at the commit this page was built from.
Arduino Tracking Antenna: common questions
How big is the Arduino Tracking Antenna PCB?
The Arduino Tracking Antenna measures 53.1 × 66.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Arduino Tracking Antenna?
41 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Arduino Tracking Antenna design files?
From the UWARG/hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Arduino Tracking Antenna design in my own project?
The repository has no license, so all rights stay with UWARG. Use it as a reference, and ask the author before reusing the design.
More boards in hardware
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979