30 open source boards using the SC0915
Real designs built with the SC0915, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Dual Converter Motherboard
Rack-Robotics
230 × 76 mm67 parts6LNo license81IMACS Keyboard
UWARG
321.5 × 116.7 mm123 parts2LNo license59Oresat helmholtz
oresat
72.7 × 72.1 mm46 parts2LNo license18RP2040/RP2350
VWS-SDR
KI3P
100 × 100 mm103 parts4LGPL-3.012RP2040/RP2350
Europe ergo
Supermagnum
442.7 × 208.3 mm218 parts2LGPL-3.08RP2040/RP2350
MOTOR RF HAT
Just4Stan
56 × 65 mm131 parts6LNo license4RP2040/RP2350
Scbs pico
CoolNamesAllTaken
60 × 60 mm50 parts2LNo license4Multimeter
schuyler4
68 × 110 mm95 parts2LMIT3RP2040/RP2350
Mta1-usb v1-programmer
tillitis
45 × 90 mm24 parts2LCERN-OHL-S-2.03EX ONE minisumo
KamilWuu
98.2 × 82.5 mm57 parts2LNo license1RP2040/RP2350
Cv module
pythagorean-comma
107 × 233.6 mm289 parts4LNo license0RP2040/RP2350
Pinpath
rwrife
96 × 76 mm156 parts2LMIT0RP2040/RP2350
Cosmic library
Normansrule
80 × 30 mm45 parts2LMIT0LaserController
GrussmayerLab
100 × 80 mm44 parts2LNo license0Raspberry Pi
Estacao de Ignicao (THT) - LoRa 433 MHz
Serra-Rocketry
66 × 64 mm29 parts2LGPL-3.00RP2040/RP2350
Verbum horologium
i-Saac-IV
100 × 100 mm21 parts2LMIT0Telematics device
Yadnik1
117.8 × 72.3 mm17 parts2LNo license0Raspberry Pi
Gps gsm prj
bog739
108.4 × 53.3 mm16 parts2LNo license0RP2040/RP2350
Proto ads bee mcu board
PantsForBirds
55 × 58 mm20 parts2LGPL-3.0322RP2040/RP2350
EL-Load-Power-MCU
fietser28
179 × 72.5 mm129 parts4LNo license16RP2040/RP2350
Europe ergo smd
Supermagnum
434.6 × 208.2 mm218 parts2LGPL-3.08RP2040/RP2350
Scbs stm32g4
CoolNamesAllTaken
60 × 60 mm50 parts2LNo license4RP2040/RP2350
Tp1
tillitis
45 × 87 mm16 parts2LCERN-OHL-S-2.03RP2040/RP2350
ZACI - Pellet Dispenser Controller
iNkawuVervetProject
54 × 53 mm23 parts2LNo license1ESP32
Estacao de Ignicao (SMD) - LoRa 433 MHz
Serra-Rocketry
85 × 70 mm29 parts2LGPL-3.00RP2040/RP2350
Proto ads bee mcu board
dgallant0x007
55 × 58 mm20 parts2LGPL-3.00Pi50
1upkeyboards
228.6 × 130.7 mm186 parts2LCC-BY-NC-4.08RP2040/RP2350
Channel ADC Interface RevC
AnishLanka
125 × 85 mm69 parts2LNo license1Raspberry Pi
Estação de Comando — Ignição LoRa 433 MHz
Serra-Rocketry
60 × 58 mm14 parts2LGPL-3.00RP2040/RP2350
Raspberry Pi Pico carrier, 5 V in
sabas0ba
80 × 60 mm10 parts2LApache-2.01
How designs wire the SC0915
Read from the KiCad layouts of 25 open source designs, one per repository: what each pin of the SC0915 connects to, and the resistors, capacitors and other passives placed on it.
- The ADC_VREF pin is left unconnected on 20 of 24 designs (a signal on 4).
- The 3V3_EN pin is left unconnected on 20 of 24 designs (a signal on 3).
- The TP2_USB_DM pin is left unconnected on 8 of 8 designs.
- The TP3_USB_DP pin is left unconnected on 8 of 8 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3, 8, 13, 18, 23, 28, 38, D2 | Connected to: GND 83% | — |
| AGNDpin 33 | Connected to: GND 76% · a signal 16% | — |
| ADC_VREFpin 35 | Connected to: Not connected 83% · a signal 17% | — |
| 3V3_ENpin 37 | Connected to: Not connected 83% | — |
| TP1_GNDpin TP1 | Connected to: Not connected 88% | — |
| TP2_USB_DMpin TP2 | Connected to: Not connected 100% | — |
| TP3_USB_DPpin TP3 | Connected to: Not connected 100% | — |
| TP4_GPIO23/SMPS_PSpin TP4 | Connected to: Not connected 100% | — |
| TP5_GPIO25/LEDpin TP5 | Connected to: Not connected 100% | — |
| TP6_BOOTSELpin TP6 | Connected to: Not connected 100% | — |
32 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Proto ads bee mcu board by PantsForBirds, Dual Converter Motherboard by Rack-Robotics, IMACS Keyboard by UWARG and Oresat helmholtz by oresat.
The SC0915 in open source designs
The gallery holds 30 open source boards using the SC0915 from 25 GitHub repositories; a typical one measures about 90.5 × 74.3 mm and carries around 48 components.
83% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Proto ads bee mcu board by PantsForBirds.
Parts used alongside the SC0915
Microcontrollers on boards using the SC0915
What boards using the SC0915 are built for
SC0915: common questions
Where can I find a SC0915 reference design?
Each of the 30 boards on this page is a real design using the SC0915. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SC0915 ADC_VREF pin connected?
The ADC_VREF pin is left unconnected on 20 of 24 designs (a signal on 4). Counted from the KiCad layouts of 25 open source designs using the SC0915.
How is the SC0915 3V3_EN pin connected?
The 3V3_EN pin is left unconnected on 20 of 24 designs (a signal on 3). Counted from the KiCad layouts of 25 open source designs using the SC0915.
How is the SC0915 TP2_USB_DM pin connected?
The TP2_USB_DM pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 25 open source designs using the SC0915.
Which microcontrollers do boards using the SC0915 use?
Most are built on RP2040/RP2350 (18), Raspberry Pi (3) and ESP32 (1).
How big is a typical board using the SC0915?
The median is 90.5 × 74.3 mm, and 83% are two-layer designs.
What is the most popular open source board using the SC0915?
By GitHub stars, Proto ads bee mcu board by PantsForBirds, with 322 stars.
Can I simulate one of these boards using the SC0915 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.