MotorDriver

UWRoverTeam·low_level·motorDriver/pcb/motorDriver.kicad_pcb

MotorDriver PCB layout, top view — open source STM32 board by UWRoverTeam

About the MotorDriver PCB

MotorDriver is an open source STM32 PCB design by UWRoverTeam, published on GitHub. It is a 2-layer board measuring 59 × 40 mm, with 60 components from 32 distinct parts.

Its main chip is the STM32F105RBTx, from the STM32 family. Other key parts include the RCLAMP0504F, SN65HVD231 and LM1117-3.3. By type, the board carries 20 capacitors, 15 connectors, 10 resistors, 7 ICs, 6 diodes and 1 crystal.

It belongs with the robotics & motion designs in this gallery.

Main components on the MotorDriver

MotorDriver bill of materials (BOM)

60 components, 32 distinct parts.

QtyPartRefs
3
RCLAMP0504F
IC1, IC3, IC4
2
SN65HVD231
U1, U2
1
STM32F105RBTx
U3
1
LM1117-3.3
U4
1
Crystal_GND24
Y1
1
DEBUG_SERIAL_CONN
J1
1
PROG_CONN
J2
1
CAN1_POWER
J3
1
CAN1_GND
J4
1
CAN1_CONN1
J5
1
CAN1_CONN2
J6
1
CAN2_CONN
J7
1
VESC_CONN
J9
1
POLOLU_CTRL_CONN
J10
1
POLOLU_VREF_CONN
J11
1
POLOLU_MOTOR_CONN
J12
1
MOTOR_A_CONN
J13
1
MOTOR_B_CONN
J14
1
GNDPWR_CONN
J15
1
BATT_CONN
J16
Show 12 more
QtyPartRefs
1
Polyfuse
F1
5
LED
D1, D2, D3, D5, D6
1
D_Schottky
D4
2
18p
C1, C3
13
100n
C2, C4, C6, C7, C8, C9, C10, C11 +5
4
4u7
C5, C12, C13, C19
1
CP
C23
4
100R
R1, R2, R3, R6
3
2k2
R4, R7, R13
1
220R
R5
1
39k
R8
1
47k
R14

MotorDriver design files

The KiCad project lives in the UWRoverTeam/low_level repository on GitHub; these links point at the commit this page was built from.

MotorDriver: common questions

What microcontroller does the MotorDriver use?

The MotorDriver is built around the STM32F105RBTx, from the STM32 family.

How big is the MotorDriver PCB?

The MotorDriver measures 59 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MotorDriver?

60 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the MotorDriver design files?

From the UWRoverTeam/low_level repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the MotorDriver design in my own project?

The repository has no license, so all rights stay with UWRoverTeam. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MotorDriver without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in low_level

Similar boards