4 open source boards using the STM32F105RBTx
Real designs built with the STM32F105RBTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Gotek-Floppy-Disk-Emulator-V2
RichardRozehnal
90 × 60 mm62 parts2LGPL-3.066STM32
Bms hardware
jsphuebner
64.5 × 85.1 mm68 parts4LGPL-3.014STM32
Hard wookey jtag
wookey-project
38.1 × 17.8 mm29 parts4LCERN-OHL-1.21STM32
MotorDriver
UWRoverTeam
59 × 40 mm60 parts2LNo license0
The STM32F105RBTx in open source designs
The gallery holds 4 open source boards using the STM32F105RBTx from 4 GitHub repositories; a typical one measures about 61.8 × 50 mm and carries around 61 components.
50% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Gotek-Floppy-Disk-Emulator-V2 by RichardRozehnal.
Parts used alongside the STM32F105RBTx
Microcontrollers on boards using the STM32F105RBTx
What boards using the STM32F105RBTx are built for
STM32F105RBTx: common questions
Where can I find a STM32F105RBTx reference design?
Each of the 4 boards on this page is a real design using the STM32F105RBTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32F105RBTx use?
Most are built on STM32 (4).
How big is a typical board using the STM32F105RBTx?
The median is 61.8 × 50 mm, and 50% are two-layer designs.
What is the most popular open source board using the STM32F105RBTx?
By GitHub stars, Gotek-Floppy-Disk-Emulator-V2 by RichardRozehnal, with 66 stars.
Can I simulate one of these boards using the STM32F105RBTx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.