12 open source boards using the SN65HVD231

Real designs built with the SN65HVD231, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the SN65HVD231

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the SN65HVD231 connects to, and the resistors, capacitors and other passives placed on it.

  • The VREF pin is left unconnected on 8 of 9 designs.
  • The VCC pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF (then 330 pF).
  • The CANH pin has a series resistor on 5 of 9 designs, most often 56 Ω (then 0 Ω).
  • The CANL pin has a series resistor on 4 of 9 designs, most often 56 Ω (then 120 Ω).
GNDpin 2Connected to: GND 100%
VCCpin 3Connected to: 3.3V 100%
  • Decoupling capacitor on 67% · 100 nF (8), 330 pF (1), 1 µF (1)
VREFpin 5Connected to: Not connected 89%
CANLpin 6Connected to: A connector 100%
  • Series resistor on 44% · 56 Ω (3), 120 Ω (1), 0 Ω (1)
CANHpin 7Connected to: A connector 100%
  • Series resistor on 56% · 56 Ω (3), 0 Ω (1), 120 Ω (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenFlowMeter by JochiSt, EtherCATControllerHP by kscalelabs, Bobbycar boardcomputer hardware by bobbycar-graz and Reaction wheel controller pcb by vatsalbansal123.

The SN65HVD231 in open source designs

The gallery holds 12 open source boards using the SN65HVD231 from 9 GitHub repositories; a typical one measures about 51 × 50.5 mm and carries around 124 components.

50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is OpenFlowMeter by JochiSt.

Parts used alongside the SN65HVD231

Microcontrollers on boards using the SN65HVD231

What boards using the SN65HVD231 are built for

SN65HVD231: common questions

Where can I find a SN65HVD231 reference design?

Each of the 12 boards on this page is a real design using the SN65HVD231. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SN65HVD231 VREF pin connected?

The VREF pin is left unconnected on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the SN65HVD231.

What decoupling capacitors do designs use on the SN65HVD231 VCC pin?

The VCC pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF (then 330 pF). Counted from the KiCad layouts of 9 open source designs using the SN65HVD231.

What resistor goes on the SN65HVD231 CANH pin?

The CANH pin has a series resistor on 5 of 9 designs, most often 56 Ω (then 0 Ω). Counted from the KiCad layouts of 9 open source designs using the SN65HVD231.

Which microcontrollers do boards using the SN65HVD231 use?

Most are built on STM32 (6), ESP32 (3) and NXP (1).

How big is a typical board using the SN65HVD231?

The median is 51 × 50.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the SN65HVD231?

By GitHub stars, OpenFlowMeter by JochiSt, with 6 stars.

Can I simulate one of these boards using the SN65HVD231 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part