MotorCtrl ble-STM32
Vaneiges·MotorCtrl-ble-STM32·kicad/MotorCtrl/MotorCtrl.kicad_pcb
About the MotorCtrl ble-STM32 PCB
MotorCtrl ble-STM32 is an open source PCB design by Vaneiges, published on GitHub. It is a 2-layer board measuring 35.5 × 40.2 mm, with 29 components from 16 distinct parts.
Other key parts include the AMS1117-3.3 and WeAct_STM32WB55. By type, the board carries 9 capacitors, 9 resistors, 4 connectors, 3 switches, 2 ICs and 2 diodes.
It belongs with the iot & wireless and robotics & motion designs in this gallery.
From the project
Wireless control and live telemetry for a dual 12 V BLDC motor controller, built on the WeAct STM32WB55 (Cortex-M4 + Bluetooth LE 5.0). Phase 2 adds BLE control plus a Web Bluetooth dashboard — drive the motors and watch live data from a phone or laptop, with no app install. The
Wireless control and live telemetry for a dual 12 V BLDC motor controller, built on the WeAct STM32WB55 (Cortex-M4 + Bluetooth LE 5.0). Phase 2 adds BLE control plus a Web Bluetooth dashboard — drive the motors and watch live data from a phone or laptop, with no app install. The original push-button control still works in parallel.
- Two BLDC motors, closed-loop PID speed control (100 ms tick), tachometer feedback. - Three run modes: Timed run (default 35 s) · Continuous (CONTINUE button: run while held; app command: latched until Stop) · Stopped. - Live telemetry: actual speed, cumulative…
Main components on the MotorCtrl ble-STM32
MotorCtrl ble-STM32 bill of materials (BOM)
29 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | WeAct_STM32WB55 | PinHeader_2x12_P2.54mm_Vertical | U2 |
| 1 | 12V_DC_Jack | BarrelJack_Horizontal | J1 |
| 1 | Motor_M1 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Motor_M2 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | SWD | PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | START | SW_PUSH_6mm | SW1 |
| 1 | STOP | SW_PUSH_6mm | SW2 |
| 1 | CONTINUE | SW_PUSH_6mm | SW3 |
| 1 | SS14 | D_SMA | D1 |
| 1 | LED_BLUE | LED_0805_2012Metric | D2 |
| 1 | 470uF/25V | CP_Radial_D8.0mm_P3.50mm | C1 |
| 2 | 10uF | CP_Elec_5x5.4 | C2, C3 |
| 6 | 100nF | C_0805_2012Metric | C4, C5, C6, C7, C8, C9 |
| 5 | 10k | R_0805_2012Metric | R1, R3, R5, R8, R9 |
| 4 | 1k | R_0805_2012Metric | R2, R4, R6, R7 |
MotorCtrl ble-STM32 design files
The KiCad project lives in the Vaneiges/MotorCtrl-ble-STM32 repository on GitHub; these links point at the commit this page was built from.
MotorCtrl ble-STM32: common questions
How big is the MotorCtrl ble-STM32 PCB?
The MotorCtrl ble-STM32 measures 35.5 × 40.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MotorCtrl ble-STM32?
29 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the MotorCtrl ble-STM32 design files?
From the Vaneiges/MotorCtrl-ble-STM32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MotorCtrl ble-STM32 design in my own project?
The repository has no license, so all rights stay with Vaneiges. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kPowerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.0979Trollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979