Verification unit
vasavbn2·ECE445·Verification_Unit/verification_unit.kicad_pcb
About the Verification unit PCB
Verification unit is an open source STM32 PCB design by vasavbn2, published on GitHub. It is a 2-layer board measuring 52.5 × 62.1 mm, with 36 components from 22 distinct parts.
Its main chip is the STM32C011F4PX, from the STM32 family. Other key parts include the L293D, CC1101RGPR and LM3940IT-3.3. By type, the board carries 12 capacitors, 7 diodes, 4 ICs, 4 connectors, 4 inductors and 4 resistors.
From the project
This is our repo for our ECE445 Key FOB project
Main components on the Verification unit
Verification unit bill of materials (BOM)
36 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32C011F4PX STM32C011F4Px | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | L293D | DIP-16_W7.62mm | U2 |
| 1 | CC1101RGPR | RGP20_2P4X2P4 | U3 |
| 1 | LM3940IT-3.3 | LM3940IT-3.3 | U4 |
| 1 | NX3225GA-26.000MHZ-EXS00A-CG01972 | NX3225GA16000MSTDCRG1 | Y1 |
| 1 | CONN_02X04_COUNTER_CLOCKWISE Conn_02x04_Counter_Clockwise | PinSocket_2x04_P2.54mm_Vertical | J1 |
| 1 | Conn_Coaxial | SMA_Amphenol_901-143_Horizontal | J2 |
| 1 | CONN_01X02_SOCKET Conn_01x02_Socket | PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | CONN_01X01_SOCKET Conn_01x01_Socket | PinSocket_1x01_P2.54mm_Vertical | J4 |
| 1 | LED_Transmit | LED_0805_2012Metric | D1 |
| 1 | LED_Receive | LED_0805_2012Metric | D2 |
| 1 | LED_Valid | LED_0805_2012Metric | D3 |
| 4 | 1N4001 | D_0805_2012Metric | D11, D12, D13, D14 |
| 3 | 33NH 33nH | L_0805_2012Metric | L1, L2, L4 |
| 1 | 18NH 18nH | L_0805_2012Metric | L3 |
| 4 | 0.1UF 0.1uF | C_0805_2012Metric | C1, C2, C4, C5 |
| 2 | 27PF 27pF | C_0805_2012Metric | C3, C6 |
| 3 | 6.8PF 6.8pF | C_0805_2012Metric | C7, C9, C11 |
| 2 | 220PF 220pF | C_0805_2012Metric | C8, C12 |
| 1 | 12PF 12pF | C_0805_2012Metric | C10 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 56K 56k | C_0805_2012Metric | R1 |
| 3 | 68 | R_0805_2012Metric | R2, R3, R6 |
Verification unit design files
The KiCad project lives in the vasavbn2/ECE445 repository on GitHub; these links point at the commit this page was built from.
Verification unit: common questions
What microcontroller does the Verification unit use?
The Verification unit is built around the STM32C011F4PX, from the STM32 family.
How big is the Verification unit PCB?
The Verification unit measures 52.5 × 62.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Verification unit?
36 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Verification unit design files?
From the vasavbn2/ECE445 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Verification unit design in my own project?
The repository has no license, so all rights stay with vasavbn2. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Verification unit without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in ECE445
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k