Touch-6pin adapter
vasya-zh·kampela-soldering-kit·kicad/touch-6pin-adapter/touch-6pin-adapter.kicad_pcb
About the Touch-6pin adapter PCB
Touch-6pin adapter is an open source PCB design by vasya-zh, published on GitHub. It is a 2-layer board measuring 17.8 × 7.6 mm, with 8 components from 4 distinct parts.
By type, the board carries 4 resistors, 3 connectors and 1 capacitor.
It belongs with the displays & leds and dev boards & breakouts designs in this gallery.
From the project
Kampela Soldering Kit
Do-it-yourself kit to make your own, fully-functional Kampela signer
We want to make kampela design as transparent, verifiable and open-source as possible, that's simple.
Kampela solder kit consists of several off-the-shelf modules, simple electronic components and 3d printed parts:
Modules: - 1pc - Lisko A1 EFM32 devboard - 1pc - SparkFun BabyBuck 3.3V - step-down converter module - 1pc - Olimex BB-PWR-3608 - step-up converter module 12V/24V - 1pc - Touch-6pin-adapter - 6-pin 0.5mm pitch FPC cable adapter for i2c touch screens - 1pc - NFC tag PCB with M24SR02 NFC EEPROM chip onboard

Touch-6pin adapter bill of materials (BOM)
8 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X06 Conn_01x06 | HRS_FH34SRJ-6S-0.5SH_50_ | J1 |
| 2 | CONN_01X03 Conn_01x03 | Connector_Castelled_3pin_2.54mm_withVIA | J2, J3 |
| 1 | 0.1UF 0.1uF | C_0402_1005Metric | C1 |
| 4 | 10K 10k | R_0402_1005Metric | R1, R2, R3, R4 |
Touch-6pin adapter design files
The KiCad project lives in the vasya-zh/kampela-soldering-kit repository on GitHub; these links point at the commit this page was built from.
Touch-6pin adapter: common questions
How big is the Touch-6pin adapter PCB?
The Touch-6pin adapter measures 17.8 × 7.6 mm, has 2 copper layers and is 0.6 mm thick.
How many components are on the Touch-6pin adapter?
8 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Touch-6pin adapter design files?
From the vasya-zh/kampela-soldering-kit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Touch-6pin adapter design in my own project?
The repository has no license, so all rights stay with vasya-zh. Use it as a reference, and ask the author before reusing the design.
More boards in kampela-soldering-kit
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k