Sbc at91sam9g25
vd-rd·sbc_at91sam9g25·hw-mobile/module.kicad_pcb
About the Sbc at91sam9g25 PCB
Sbc at91sam9g25 is an open source PCB design by vd-rd, published on GitHub. It is a 4-layer board measuring 66 × 42 mm, with 104 components from 37 distinct parts.
Other key parts include the AT91SAM9G15, MCP16501A, W25Q128JVS, RTL8188CUS and USBLC6-2P6. By type, the board carries 56 capacitors, 24 resistors, 7 connectors, 6 ICs, 3 inductors and 2 crystals.
It belongs with the iot & wireless designs in this gallery.
From the project
Open hardware SBC module based on AT91SAM9G25 (G15/G35/X25/X35) @400MHz with up to 256MB DDR2 RAM
This board embeds a single core 400MHz ARM926EJ-S with up to 256MB DDR2) with MCP15601 PMIC, IO headers and microSD/eMMC storage. The board is also compatible with SAM9G15/G25/G35/X25/X35 microprocessors and the pins are routed keeping in mind features available on each part. The table below breaks down the features available on the board depending on the part used.

Main components on the Sbc at91sam9g25
Sbc at91sam9g25 bill of materials (BOM)
104 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AT91SAM9G15 | AT91SAM9G10 | U1 |
| 1 | MCP16501A | QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias | U2 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U5 |
| 1 | RTL8188CUS | RTL8188CUS | U6 |
| 1 | USBLC6-2P6 | SOT-23-6 | U7 |
| 1 | DDR2-x16 | BGA-84_9x15_8.0x12.5mm | U200 |
| 1 | BSS84 | SOT-323_SC-70 | Q1 |
| 1 | 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | Micro_SD_Card_Det | MEM20610118800A | J1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | Conn_02x18_Odd_Even | PinHeader_2x18_P2.54mm_Vertical | J3 |
| 3 | Conn_01x08 | PinHeader_2x04_P1.27mm_Vertical | J4, J5, J7 |
| 1 | Conn_02x22_Odd_Even | PinHeader_2x22_P1.27mm_Vertical | J6 |
| 1 | Antenna_Shield | U.FL_Hirose_U.FL-R-SMT-1_Vertical | AE1 |
| 2 | SW_SPST | SW_SPST_EVQP7C | SW1, SW2 |
| 1 | D_Schottky | D_SOD-523 | D2 |
| 1 | LED_BAGR | LED_RGB_Optosupply_OSTB0805C1E-A-0.8T | D4 |
| 3 | 2.2uH | L_Wuerth_MAPI-2512 | L1, L2, L3 |
| 2 | 22pF | C_0402_1005Metric | C1, C4 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 12pF | C_0402_1005Metric | C2, C3 |
| 19 | 220nF | C_0402_1005Metric | C5, C6, C7, C17, C18, C19, C20, C21 +11 |
| 7 | 10uF | C_0603_1608Metric | C8, C9, C10, C12, C13, C14, C912 |
| 2 | 2.2uF | C_0402_1005Metric | C11, C15 |
| 1 | 10pF | C_0402_1005Metric | C16 |
| 21 | 100nF | C_0402_1005Metric | C33, C34, C38, C200, C201, C202, C203, C204 +13 |
| 2 | 1uF | C_0402_1005Metric | C36, C37 |
| 5 | 68k | R_0402_1005Metric | R1, R6, R8, R25, R26 |
| 6 | 39 | R_0402_1005Metric | R2, R3, R4, R5, R15, R16 |
| 1 | 1M | R_0402_1005Metric | R7 |
| 1 | 22k | R_0402_1005Metric | R9 |
| 1 | 191k | R_0402_1005Metric | R10 |
| 3 | 2.2k | R_0402_1005Metric | R11, R17, R18 |
| 2 | 5.1K | R_0402_1005Metric | R12, R13 |
| 1 | 6k8 | R_0402_1005Metric | R14 |
| 1 | 47k | R_0402_1005Metric | R19 |
| 3 | 180 | R_0402_1005Metric | R20, R21, R22 |
Sbc at91sam9g25 design files
The KiCad project lives in the vd-rd/sbc_at91sam9g25 repository on GitHub; these links point at the commit this page was built from.
- Layouthw-mobile/module.kicad_pcb
- Schematichw-mobile/module.kicad_sch
Sbc at91sam9g25: common questions
How big is the Sbc at91sam9g25 PCB?
The Sbc at91sam9g25 measures 66 × 42 mm, has 4 copper layers and is 1.1842 mm thick.
How many components are on the Sbc at91sam9g25?
104 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sbc at91sam9g25 design files?
From the vd-rd/sbc_at91sam9g25 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sbc at91sam9g25 design in my own project?
The repository has no license, so all rights stay with vd-rd. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kL0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547Breakout board
Luos-io
26.7 × 27.9 mm29 parts2LMIT547Stm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547