Sbc microchip SAM9X60
About the Sbc microchip SAM9X60 PCB
Sbc microchip SAM9X60 is an open source PCB design by vd-rd, published on GitHub. It is a 4-layer board measuring 66 × 42 mm, with 126 components from 50 distinct parts.
Other key parts include the SAM9X60D1G, nand-flash-tsop48, W25Q128JVS, MIC5365-3.3YC5 and USBLC6-2P6. By type, the board carries 61 capacitors, 38 resistors, 7 ICs, 7 connectors, 3 diodes and 3 inductors.
From the project
Open hardware SBC with Microchip SAM9X60 MPU. Arm926 @600MHz
This board embeds a SIP (single core 600MHz ARM926 with 1Gb DDR2) with ACT8945a PMIC, IO headers and microSD/eMMC storage.
Main components on the Sbc microchip SAM9X60
Sbc microchip SAM9X60 bill of materials (BOM)
126 components, 50 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SAM9X60D1G | SAM9X60D1G | U2 |
| 1 | nand-flash-tsop48 | TSOP-I-48_18.4x12mm_P0.5mm | U3 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U4 |
| 1 | MIC5365-3.3YC5 | SOT-353_SC-70-5 | U5 |
| 1 | USBLC6-2P6 | SOT-23-6 | U6 |
| 1 | ACT8945A | TQFN-40-1EP_5x5mm_P0.4mm_EP3.5x3.5mm_ThermalVias | U800 |
| 1 | RTL8723BS | lga44_12x12mm_P0.9 | U900 |
| 1 | BSS84 | SOT-323_SC-70 | Q800 |
| 1 | 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 24MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | Conn_02x22_Odd_Even | PinHeader_2x22_P1.27mm_Vertical | J1 |
| 1 | Conn_02x18_Odd_Even | PinHeader_2x18_P2.54mm_Vertical | J2 |
| 3 | Conn_01x08 | PinHeader_2x04_P1.27mm_Vertical | J3, J4, J5 |
| 1 | Micro_SD_Card_Det | MEM20610118800A | J6 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J8 |
| 1 | Antenna_Shield | U.FL_Hirose_U.FL-R-SMT-1_Vertical | AE1 |
| 2 | SW_SPST | SW_SPST_EVQP7C | SW1, SW2 |
| 1 | Thermistor_NTC | R_0603_1608Metric | TH1 |
| 1 | LED_Small | LED_0603_1608Metric | D2 |
| 1 | LED_BAGR | LED_RGB_Optosupply_OSTB0805C1E-A-0.8T | D4 |
Show 30 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | D_Schottky | D_SOD-523 | D800 |
| 3 | 2.2uH | L_Wuerth_MAPI-2510 | L800, L801, L802 |
| 28 | 100nF | C_0402_1005Metric | C1, C2, C5, C6, C7, C8, C10, C11 +20 |
| 1 | 22pF | C_0402_1005Metric | C3 |
| 4 | C_Small | C_0402_1005Metric | C4, C17, C23, C24 |
| 14 | 4.7uF | C_0603_1608Metric | C9, C14, C28, C29, C801, C803, C807, C812 +6 |
| 1 | CPH3225 | C_1210_3225Metric | C18 |
| 1 | 2.2uF | C_0402_1005Metric | C25 |
| 3 | 1uF | C_0402_1005Metric | C36, C818, C823 |
| 1 | 47nF | C_0402_1005Metric | C802 |
| 7 | 10uF | C_0603_1608Metric | C804, C805, C806, C808, C809, C810, C811 |
| 1 | 2.2uF | C_0603_1608Metric | C814 |
| 3 | 180 | R_0402_1005Metric | R1, R2, R8 |
| 2 | 2.2k | R_0402_1005Metric | R3, R23 |
| 7 | 47k | R_0402_1005Metric | R4, R16, R26, R28, R801, R802, R803 |
| 6 | 50k | R_0402_1005Metric | R5, R7, R9, R19, R20, R27 |
| 1 | 5.62k | R_0402_1005Metric | R6 |
| 2 | 4.7k | R_0402_1005Metric | R10, R11 |
| 1 | 8.2k | R_0402_1005Metric | R12 |
| 3 | 33k | R_0402_1005Metric | R13, R14, R15 |
| 3 | 1.8k | R_0402_1005Metric | R17, R18, R29 |
| 1 | 1M | R_0402_1005Metric | R21 |
| 2 | 5.1K | R_0402_1005Metric | R22, R24 |
| 1 | 20k | R_0402_1005Metric | R25 |
| 1 | 2.2M | R_0402_1005Metric | R804 |
| 1 | 1.5M | R_0402_1005Metric | R805 |
| 1 | 2.4k | R_0402_1005Metric | R806 |
| 1 | 24 | R_0402_1005Metric | R807 |
| 1 | 68k | R_Array_Concave_4x0402 | RN3 |
| 1 | 33k | R_Array_Concave_4x0402 | RN5 |
Sbc microchip SAM9X60 design files
The KiCad project lives in the vd-rd/sbc_microchip_SAM9X60 repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/sbc.kicad_pcb
- Schematichardware/sbc.kicad_sch
Sbc microchip SAM9X60: common questions
How big is the Sbc microchip SAM9X60 PCB?
The Sbc microchip SAM9X60 measures 66 × 42 mm, has 4 copper layers and is 0.948 mm thick.
How many components are on the Sbc microchip SAM9X60?
126 components, from 50 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sbc microchip SAM9X60 design files?
From the vd-rd/sbc_microchip_SAM9X60 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sbc microchip SAM9X60 design in my own project?
The repository has no license, so all rights stay with vd-rd. Use it as a reference, and ask the author before reusing the design.