Radiant
VersBinarii·radiant·schematics/lampa/lampa.kicad_pcb
About the Radiant PCB
Radiant is an open source STM32 PCB design by VersBinarii, published on GitHub. It is a 4-layer board measuring 89 × 41.5 mm, with 47 components from 34 distinct parts.
Its main chip is the STM32F411CEUX, from the STM32 family. Other key parts include the AMS1117-3.3, LTV-814 and 4N35. By type, the board carries 15 capacitors, 11 resistors, 5 connectors, 4 ICs, 3 transistors and 2 crystals.
From the project
(WIP) Touch screen controlled dimmer
Main components on the Radiant
Radiant bill of materials (BOM)
47 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | LTV-814 | DIP-4_W7.62mm | U2 |
| 1 | 4N35 | SMDIP-6_W9.53mm_Clearance8mm | U3 |
| 1 | STM32F411CEUX STM32F411CEUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U4 |
| 2 | IRF740 | TO-220-3_Vertical | Q1, Q2 |
| 1 | S8050 | SOT-23 | Q3 |
| 1 | 16MHZ 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Crystal | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 2 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J1, J2 |
| 1 | CONN_01X14 Conn_01x14 | PinHeader_1x14_P2.54mm_Vertical | J3 |
| 2 | CONN_01X04 Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J4, J5 |
| 1 | Fuse | Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | HLK-PM12 | Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | SW_SPST | PinSocket_1x02_P2.54mm_Vertical | SW1 |
| 1 | SW_SPDT | PinHeader_1x03_P2.54mm_Vertical | SW2 |
| 1 | C72041 LED BLUE | LED_0603_1608Metric | D1 |
| 1 | C72043 LED GREEN | LED_0603_1608Metric | D2 |
| 1 | 39NH 39nH | L_0402_1005Metric | L1 |
| 1 | 4.7UF 4.7uF | C_0402_1005Metric | C1 |
| 4 | 100NF 100nF | C_0402_1005Metric | C2, C3, C4, C5 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1UF 1uF | C_0402_1005Metric | C6 |
| 1 | 10NF 10nF | C_0402_1005Metric | C7 |
| 1 | 10UF 10uF | C_1206_3216Metric | C8 |
| 4 | 20PF 20pF | C_0402_1005Metric | C9, C10, C13, C14 |
| 2 | 2.2UF 2.2uF | C_0603_1608Metric | C11, C12 |
| 1 | 100NF 100nF | C_0603_1608Metric | C15 |
| 1 | 47 | R_0402_1005Metric | R1 |
| 2 | 47K | R_0603_1608Metric | R2, R3 |
| 1 | 10K | R_0603_1608Metric | R4 |
| 1 | 22K | R_0402_1005Metric | R5 |
| 1 | 2K | R_0402_1005Metric | R6 |
| 2 | 680 | R_0603_1608Metric | R7, R8 |
| 2 | 4.7K | R_0402_1005Metric | R9, R10 |
| 1 | 10K | R_0402_1005Metric | R11 |
Radiant design files
The KiCad project lives in the VersBinarii/radiant repository on GitHub; these links point at the commit this page was built from.
Radiant: common questions
What microcontroller does the Radiant use?
The Radiant is built around the STM32F411CEUX, from the STM32 family.
How big is the Radiant PCB?
The Radiant measures 89 × 41.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Radiant?
47 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Radiant design files?
From the VersBinarii/radiant repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Radiant design in my own project?
The repository has no license, so all rights stay with VersBinarii. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Radiant without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k