HardwareBAS
VINN17·KRTech·Hardware/HardwareBAS/HardwareBAS.kicad_pcb
About the HardwareBAS PCB
HardwareBAS is an open source AVR/Arduino PCB design by VINN17, published on GitHub. It is a 2-layer board measuring 133 × 74.1 mm, with 32 components from 14 distinct parts.
Its main chip is the ARDUINO_UNO_REV3, from the AVR/Arduino family. Other key parts include the L78M05CDT. By type, the board carries 9 resistors, 4 transistors, 4 diodes, 4 capacitors, 3 connectors and 1 IC.
It belongs with the iot & wireless designs in this gallery.
From the project
https://github.com/user-attachments/assets/4135e06a-734f-496c-8481-714472587500
https://github.com/user-attachments/assets/4135e06a-734f-496c-8481-714472587500
1. 📌 Deskripsi Proyek 2. 🎯 Tujuan Proyek 3. 🛠️ Teknologi dan Komponen 4. ⚙️ Cara Kerja Sistem 5. 🧩 Diagram Alur Sistem 6. 🌟 Keunggulan Proyek 7. 📈 Potensi Pengembangan 8. 🤝 Kolaborasi & Dukungan 9. 👥 Struktur Tim 10. 📩 Hubungi Kami
Building Automation Systems ini dirancang untuk mengotomatisasi pengoperasian pompa air pada jalan tol guna mengatasi genangan atau banjir secara cepat dan efisien.
Main components on the HardwareBAS
HardwareBAS bill of materials (BOM)
32 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L78M05CDT | VREG_L78M05CDT | U2 |
| 1 | ARDUINO_UNO_REV3 | ARDUINO_ARDUINO_UNO_REV3 | A1 |
| 4 | S9013 | SOT95P240X120-3N | Q2, Q3, Q4, Q5 |
| 1 | Crystal | XTAL_ECS-160-S-4X | Y1 |
| 1 | EJ508A | MPD_EJ508A | J1 |
| 2 | 284512-8 | TE_284512-8 | J2, J3 |
| 4 | SRD-05VDC-SL-C | RELAY_SRD-05VDC-SL-C | RELAY1, RELAY2, RELAY3, RELAY4 |
| 1 | Conn_01x04_Socket | JST_B4B-XH-A_LF__SN_ | USART2 |
| 4 | 1N4001/1N4148 | SOD123 | D1, D2, D3, D4 |
| 2 | 22pf | CAPC2012X95N | C1, C2 |
| 1 | 100uf | CAPC2012X140N | C3 |
| 1 | 10uf | CAPC2012X140N | C4 |
| 4 | 10K | R_0805_2012Metric | R1, R7, R8, R9 |
| 5 | 1K | R_0805_2012Metric | R2, R3, R4, R5, R6 |
HardwareBAS design files
The KiCad project lives in the VINN17/KRTech repository on GitHub; these links point at the commit this page was built from.
HardwareBAS: common questions
What microcontroller does the HardwareBAS use?
The HardwareBAS is built around the ARDUINO_UNO_REV3, from the AVR/Arduino family.
How big is the HardwareBAS PCB?
The HardwareBAS measures 133 × 74.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HardwareBAS?
32 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the HardwareBAS design files?
From the VINN17/KRTech repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the HardwareBAS design in my own project?
The repository has no license, so all rights stay with VINN17. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the HardwareBAS without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in KRTech
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k