AVR328

VINN17·KRTech·Hardware/AVR328/AVR328.kicad_pcb

AVR328 PCB layout, top view — open source AVR/Arduino board by VINN17

About the AVR328 PCB

AVR328 is an open source AVR/Arduino PCB design by VINN17, published on GitHub. It is a 2-layer board measuring 58.6 × 57.4 mm, with 33 components from 14 distinct parts.

Its main chip is the ATMEGA328P-AU, from the AVR/Arduino family. Other key parts include the L78M05CDT. By type, the board carries 9 resistors, 4 transistors, 4 diodes, 4 capacitors, 3 connectors and 2 ICs.

It belongs with the iot & wireless designs in this gallery.

From the project

https://github.com/user-attachments/assets/4135e06a-734f-496c-8481-714472587500

https://github.com/user-attachments/assets/4135e06a-734f-496c-8481-714472587500

1. 📌 Deskripsi Proyek 2. 🎯 Tujuan Proyek 3. 🛠️ Teknologi dan Komponen 4. ⚙️ Cara Kerja Sistem 5. 🧩 Diagram Alur Sistem 6. 🌟 Keunggulan Proyek 7. 📈 Potensi Pengembangan 8. 🤝 Kolaborasi & Dukungan 9. 👥 Struktur Tim 10. 📩 Hubungi Kami

Building Automation Systems ini dirancang untuk mengotomatisasi pengoperasian pompa air pada jalan tol guna mengatasi genangan atau banjir secara cepat dan efisien.

AVR328, from the project README
From the project README

Main components on the AVR328

AVR328 bill of materials (BOM)

33 components, 14 distinct parts.

QtyPartRefs
1
ATMEGA328P-AU
U1
1
L78M05CDT
U2
4
S9013
Q2, Q3, Q4, Q5
1
Crystal
Y1
1
EJ508A
J1
2
284512-8
J2, J3
4
SRD-05VDC-SL-C
RELAY1, RELAY2, RELAY3, RELAY4
2
Conn_01x04_Socket
SUPPLY1, USART2
4
1N4001/1N4148
D1, D2, D3, D4
2
22pf
C1, C2
1
100uf
C3
1
10uf
C4
4
10K
R1, R7, R8, R9
5
1K
R2, R3, R4, R5, R6

AVR328 design files

The KiCad project lives in the VINN17/KRTech repository on GitHub; these links point at the commit this page was built from.

AVR328: common questions

What microcontroller does the AVR328 use?

The AVR328 is built around the ATMEGA328P-AU, from the AVR/Arduino family.

How big is the AVR328 PCB?

The AVR328 measures 58.6 × 57.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AVR328?

33 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the AVR328 design files?

From the VINN17/KRTech repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the AVR328 design in my own project?

The repository has no license, so all rights stay with VINN17. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the AVR328 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in KRTech

Similar boards