HardLabs

Aesthetiocizer

ViratS-best·Aesthetiocizer·design/Aestheticreal.kicad_pcb

Aesthetiocizer PCB layout, top view — open source RP2040/RP2350 board by ViratS-best

About the Aesthetiocizer PCB

Aesthetiocizer is an open source RP2040/RP2350 PCB design by ViratS-best, published on GitHub. It is a 2-layer board measuring 81.5 × 79.5 mm, with 23 components from 15 distinct parts.

Its main chip is the XIAO-RP2040-SMD, from the RP2040/RP2350 family. By type, the board carries 6 diodes, 5 resistors, 3 modules, 3 transistors, 1 IC and 1 connector.

It belongs with the audio designs in this gallery.

From the project

Xiao car AI project: firmware inference, embedded model assets, and hardware design.

Voice-controlled car firmware and hardware design for the Seeed XIAO RP2040. The firmware captures microphone audio, runs an Edge Impulse model, and uses recognized commands to control the car.

The firmware responds to classifications with confidence of at least 0.85: - drive starts the motors. - stop stops the motors. - music plays a melody through the speaker. - lights flashes the LEDs.

Aesthetiocizer, from the project README
From the project README

Main components on the Aesthetiocizer

XIAO-RP2040-SMD

Aesthetiocizer bill of materials (BOM)

23 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-SMD
U2
2
Motor_DC
M1, M3
1
Motor_Servo
M2
2
AO3400A
Q1, Q3
1
2N2219
Q2
1
CONN_01X04_PIN
Conn_01x04_Pin
J1
1
Battery
BT1
1
Speaker
LS1
1
IM69D120
MK1
3
L08R5000Q1
D1, D2, D3
3
1N4007
D4, D5, D6
1
0.1
0.1µF
C1
3
220
R
R1, R2, R3
1
1000
1kΩ
R4
1
10000
10k
R5

Aesthetiocizer design files

The KiCad project lives in the ViratS-best/Aesthetiocizer repository on GitHub; these links point at the commit this page was built from.

Aesthetiocizer: common questions

What microcontroller does the Aesthetiocizer use?

The Aesthetiocizer is built around the XIAO-RP2040-SMD, from the RP2040/RP2350 family.

How big is the Aesthetiocizer PCB?

The Aesthetiocizer measures 81.5 × 79.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Aesthetiocizer?

23 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Aesthetiocizer design files?

From the ViratS-best/Aesthetiocizer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Aesthetiocizer design in my own project?

The repository has no license, so all rights stay with ViratS-best. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Aesthetiocizer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards