STM32-Sensor-Board

vishnukashikar·STM32-Sensor-Board·hardware/stm32_sensor_board.kicad_pcb

STM32-Sensor-Board layout, top view — open source STM32 board by vishnukashikar

About the STM32-Sensor-Board

STM32-Sensor-Board is an open source STM32 PCB design by vishnukashikar, published on GitHub under the MIT license. It is a 2-layer board measuring 65.5 × 54 mm, with 30 components from 24 distinct parts.

Its main chip is the STM32C031C6Tx, from the STM32 family. Other key parts include the AMS1117-3.3 and MPU-6050. By type, the board carries 12 capacitors, 6 resistors, 5 connectors, 3 ICs, 1 crystal and 1 switch.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

KiCad design for a custom STM32C031 board with an MPU-6050 accelerometer/gyroscope, USB-C power, SWD header and GPIO breakout.

A small custom board built around an STM32C031C6 microcontroller and an MPU-6050 6-axis accelerometer/gyroscope (I2C), designed in KiCad.

Status: v1 (2026-09-17), design complete, not yet fabricated or tested.

This is a hardware design project: the repository contains the KiCad schematic and PCB layout only, with no firmware.

Board: 2-layer, about 65.5 x 54 mm, four M2 mounting holes.

STM32-Sensor-Board, from the project README
From the project README

Main components on the STM32-Sensor-Board

STM32-Sensor-Board bill of materials (BOM)

30 components, 24 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
STM32C031C6Tx
U2
1
MPU-6050
U3
1
16MHz
Y1
1
USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal
J1
1
Conn_01x07
J2
1
Conn_01x11
J3
1
Conn_01x04
J4
1
Conn_01x18
J5
1
SW_SPDT
SW1
1
LED
D1
1
120R
FB1
1
10u
C1
1
22u
C2
2
16p
C3, C5
4
100n
C4, C7, C8, C11
1
4u5
C6
1
10n
C9
1
0u1
C10
1
2n2
C12
Show 4 more
QtyPartRefs
2
5k1
R1, R2
1
300
R3
2
4.7k
R4, R6
1
10k
R5

STM32-Sensor-Board design files

The KiCad project lives in the vishnukashikar/STM32-Sensor-Board repository on GitHub; these links point at the commit this page was built from.

STM32-Sensor-Board: common questions

What microcontroller does the STM32-Sensor-Board use?

The STM32-Sensor-Board is built around the STM32C031C6Tx, from the STM32 family.

How big is the STM32-Sensor-Board?

The STM32-Sensor-Board measures 65.5 × 54 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32-Sensor-Board?

30 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32-Sensor-Board design files?

From the vishnukashikar/STM32-Sensor-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the STM32-Sensor-Board design in my own project?

Yes, under the terms of its MIT license, which vishnukashikar chose for the repository.

Can I test firmware for the STM32-Sensor-Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards