Arduino car v1
vitor-m-o·arduino_car_v1·carro-projeto-v3/carro-projeto-v3.kicad_pcb
About the Arduino car v1 PCB
Arduino car v1 is an open source AVR/Arduino PCB design by vitor-m-o, published on GitHub. It is a 2-layer board measuring 105.5 × 69 mm, with 24 components from 11 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the L293D. By type, the board carries 6 resistors, 1 IC and 1 module.
From the project
Projeto de carro de Arduino para facilitar o entendimento da programação para iniciantes
- A conexão dos botões físicamente dos carros pode mudar por conta das condições utilizadas para variar entre os botões, porém ainda será revisado e aprimorado esta parte.
- Ponte H N1 (MOVIMENTO ANTI-HORARIO ESQUERDA) -> 4 - Ponte H N2 (MOVIMENTO HORARIO ESQUERDA) -> 5 - Ponte H N3 (MOVIMENTO ANTI-HORARIO DIREITA) -> 11 - Ponte H N4 (MOVIMENTO HORARIO DIREITA) -> 6
Main components on the Arduino car v1
Arduino car v1 bill of materials (BOM)
24 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L293D | DIP-16_W7.62mm | U1 |
| 1 | Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 2 | Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Vertical | HC1, oled1 |
| 4 | Conn_01x01_Socket | PinHeader_1x01_P2.54mm_Vertical | botao1, botao2, botao3, botao4 |
| 3 | KF301-2P | HANDSON_KF301-2P | central1, motor1, motor2 |
| 3 | Conn_01x06_Socket | PinHeader_1x06_P2.54mm_Vertical | inf1, inf2, inf3 |
| 4 | Conn_01x03_Socket | PinHeader_1x03_P2.54mm_Vertical | sen1, sen2, sen3, sen4 |
| 1 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 2k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3 |
| 3 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4, R5, R6 |
Arduino car v1 design files
The KiCad project lives in the vitor-m-o/arduino_car_v1 repository on GitHub; these links point at the commit this page was built from.
Arduino car v1: common questions
What microcontroller does the Arduino car v1 use?
The Arduino car v1 is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the Arduino car v1 PCB?
The Arduino car v1 measures 105.5 × 69 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Arduino car v1?
24 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Arduino car v1 design files?
From the vitor-m-o/arduino_car_v1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Arduino car v1 design in my own project?
The repository has no license, so all rights stay with vitor-m-o. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Arduino car v1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k