Custom pcb stm32mcu
viveklegoman-del·custom-pcb-stm32mcu·kicad/customPCB.kicad_sch
About the Custom pcb stm32mcu
Custom pcb stm32mcu is an open source STM32 PCB design by viveklegoman-del, published on GitHub. It is a board, with 27 components from 17 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 12 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A custom two-layer PCB designed in KiCad around the STM32F103C8T6 microcontroller. Inspired by the STM32 Blue Pill development board, this project focuses on custom hardware design, accessible debugging and peripheral connections, power regulation, clock circuitry, and PCB manufa
A custom two-layer PCB designed in KiCad around the STM32F103C8T6 microcontroller. Inspired by the STM32 Blue Pill development board, this project focuses on custom hardware design, accessible debugging and peripheral connections, power regulation, clock circuitry, and PCB manufacturing preparation.
The goal of this project was to design a custom STM32 development board from the schematic through PCB layout and manufacturing preparation. Using the Blue Pill as a reference point, I developed my own circuit schematic and PCB layout, making component-level design decisions to support…
Main components on the Custom pcb stm32mcu
Custom pcb stm32mcu bill of materials (BOM)
27 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | 16MHZ 16MHz | Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J1 |
| 3 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 1 | 120R | L_0805_2012Metric | FB1 |
| 5 | 100N 100n | C_0402_1005Metric | C1, C2, C3, C4, C9 |
| 1 | 10N 10n | C_0402_1005Metric | C6 |
| 2 | 1u | C_0402_1005Metric | C7, C8 |
| 2 | 12P 12p | C_0402_1005Metric | C10, C11 |
| 2 | 22U 22u | C_0402_1005Metric | C12, C13 |
| 1 | 10K 10k | R_0402_1005Metric | R1 |
| 1 | 1K3 1k3 | R_0402_1005Metric | R2 |
| 1 | 1K5 1k5 | R_0402_1005Metric | R3 |
| 2 | R | R_0402_1005Metric | R4, R5 |
Custom pcb stm32mcu design files
The KiCad project lives in the viveklegoman-del/custom-pcb-stm32mcu repository on GitHub; these links point at the commit this page was built from.
Custom pcb stm32mcu: common questions
What microcontroller does the Custom pcb stm32mcu use?
The Custom pcb stm32mcu is built around the STM32F103C8T6, from the STM32 family.
How many components are on the Custom pcb stm32mcu?
27 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Custom pcb stm32mcu design files?
From the viveklegoman-del/custom-pcb-stm32mcu repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Custom pcb stm32mcu design in my own project?
The repository has no license, so all rights stay with viveklegoman-del. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Custom pcb stm32mcu without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k