Lora node e78-868ln22s minipci
About the Lora node e78-868ln22s minipci PCB
Lora node e78-868ln22s minipci is an open source PCB design by voloviq, published on GitHub. It is a 2-layer board measuring 30 × 51 mm, with 16 components from 10 distinct parts.
Other key parts include the DS18B20U+ and TCN75AVOA. By type, the board carries 6 resistors, 4 capacitors, 2 ICs and 2 connectors.
It belongs with the rf & radio designs in this gallery.
From the project
Lora Node based on E78-868LN22S module in minipci fassion
Main components on the Lora node e78-868ln22s minipci
Lora node e78-868ln22s minipci bill of materials (BOM)
16 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DS18B20U+ DS18B20U MAXIM INTEGRATED | DS18B20U_MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | TCN75AVOA TCN75A MICROCHIP TECHNOLOGY | TCN75A_SOIC8 | U2 |
| 1 | MiniPci NA | mpcie-full-card | Con1 |
| 1 | RF2-03E-T-00-50-G ADAM TECH | RF2-03E-T-00-50-G | P1 |
| 1 | E78-868LN22S REF? EByte | E78-868LN22S | Module1 |
| 1 | NTCG163JF103FT1 NTCS0603E3103FMT TDK/SR PASSIVES | NTCS0603E3103FMT | NTC1 |
| 4 | CL10B104JB8NNNC 100n_50V SAMSUNG | 100nF_0603 | C1, C2, C3, C4 |
| 1 | 0603SAJ0103T5E 10k ROYAL OHM | 10k_0603 | R1 |
| 4 | 0603SAF4701T5E 4k7 ROYAL OHM | 4k7_0603 | R2, R3, R4, R5 |
| 1 | 0603SAJ0000T5E 0R ROYAL OHM | 0R_0603 | R6 |
Lora node e78-868ln22s minipci design files
The KiCad project lives in the voloviq/lora-node-e78-868ln22s-minipci repository on GitHub; these links point at the commit this page was built from.
Lora node e78-868ln22s minipci: common questions
How big is the Lora node e78-868ln22s minipci PCB?
The Lora node e78-868ln22s minipci measures 30 × 51 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lora node e78-868ln22s minipci?
16 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lora node e78-868ln22s minipci design files?
From the voloviq/lora-node-e78-868ln22s-minipci repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lora node e78-868ln22s minipci design in my own project?
The repository has no license, so all rights stay with voloviq. Use it as a reference, and ask the author before reusing the design.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568
GoodPocketWatch
75.2 × 101.2 mm56 parts2LNo license568
Goodwatch31
25.6 × 27.6 mm23 parts2LNo license568