Binclk1

vspaceone·binclk1·binclk1/binclk1.kicad_pcb

Binclk1 PCB layout, top view — open source AVR/Arduino board by vspaceone

About the Binclk1 PCB

Binclk1 is an open source AVR/Arduino PCB design by vspaceone, published on GitHub. It is a 2-layer board measuring 72 × 27 mm, with 19 components from 8 distinct parts.

Its main chip is the ATtiny85-20P, from the AVR/Arduino family. Other key parts include the DS1302+. By type, the board carries 8 diodes, 4 resistors, 2 ICs, 2 switches, 1 crystal and 1 connector.

From the project

Proposal by H3 for a new Kindeferienprogramm kit

Main components on the Binclk1

Binclk1 bill of materials (BOM)

19 components, 8 distinct parts.

QtyPartRefs
1
DS1302+
U1
1
ATtiny85-20P
U2
1
32768Hz
Y1
1
USB_C_Receptacle_PowerOnly_6P
J1
2
SW_SPST
SW1, SW2
8
WS2812B
D1, D2, D3, D4, D5, D6, D7, D8
1
1F
C1
4
5k1
R1, R2, R3, R4

Binclk1 design files

The KiCad project lives in the vspaceone/binclk1 repository on GitHub; these links point at the commit this page was built from.

Binclk1: common questions

What microcontroller does the Binclk1 use?

The Binclk1 is built around the ATtiny85-20P, from the AVR/Arduino family.

How big is the Binclk1 PCB?

The Binclk1 measures 72 × 27 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Binclk1?

19 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Binclk1 design files?

From the vspaceone/binclk1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Binclk1 design in my own project?

The repository has no license, so all rights stay with vspaceone. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Binclk1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards