Power distribution board xt30

vsreality·power-distribution-board-xt30

Power distribution board xt30 layout, top view — open source board by vsreality

About the Power distribution board xt30

Power distribution board xt30 is an open source PCB design by vsreality, published on GitHub. It is a 2-layer board measuring 18 × 52 mm, with 5 components from 2 distinct parts.

It belongs with the robotics & motion designs in this gallery.

From the project

Power distribution board with XT30 connectors

VSReality Robotics five-port XT30 power distribution board. All five ports share a passive parallel bus; the intended arrangement is one supply and four loads.

- 18 x 52 mm, 1.6 mm FR4, two copper layers with 70 um (2 oz) copper per side. - Two 3.2 mm non-plated M3 mounting holes, 42 mm centre-to-centre. - Five centred XT30UPB connectors, spaced 7 mm apart and numbered 1-5. - Port 1: XT30UPB-F; ports 2-5: XT30UPB-M. Confirm connector gender against the intended harness. - Positive copper occupies the left strip when viewed from the front. Ground fills the remaining available area on both…

Power distribution board xt30, from the project README
From the project README

Power distribution board xt30 bill of materials (BOM)

5 components, 2 distinct parts.

QtyPartRefs
1
XT30UPB-F
J1
4
XT30UPB-M
J2, J3, J4, J5

Power distribution board xt30 design files

The KiCad project lives in the vsreality/power-distribution-board-xt30 repository on GitHub; these links point at the commit this page was built from.

Power distribution board xt30: common questions

How big is the Power distribution board xt30?

The Power distribution board xt30 measures 18 × 52 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Power distribution board xt30?

5 components, from 2 distinct parts. The full bill of materials is listed on this page.

Where can I download the Power distribution board xt30 design files?

From the vsreality/power-distribution-board-xt30 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Power distribution board xt30 design in my own project?

The repository has no license, so all rights stay with vsreality. Use it as a reference, and ask the author before reusing the design.

Similar boards