Auto Switch

VuLinh011218·Auto_Switch·Hardware/01_Design/Smart_Switch.kicad_pcb

Auto Switch PCB layout, top view — open source STM32 board by VuLinh011218

About the Auto Switch PCB

Auto Switch is an open source STM32 PCB design by VuLinh011218, published on GitHub. It is a 2-layer board measuring 100 × 67.2 mm, with 111 components from 42 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the TPS54231DR, AMS1117-3.3, AM2302 and PC817X2NIPW. By type, the board carries 33 resistors, 28 capacitors, 14 diodes, 11 connectors, 8 ICs and 5 switches.

Main components on the Auto Switch

Auto Switch bill of materials (BOM)

111 components, 42 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS54231DR
U1
1
AMS1117-3.3
U2
1
STM32F103C8T6
U3
1
AM2302
U4
4
PC817X2NIPW
U5, U6, U7, U8
4
MMBTA42
Q1, Q2, Q3, Q4
1
8MHZ_3225
8MHz_3225
Y1
1
Jack_DC
J1
1
CONN_01X04
Conn_01x04
J2
1
CONN_01X05
Conn_01x05
J3
2
CONN_01X03
Conn_01x03
J4, J5
5
Conn_01x02
J6, J7, J8, J9, J11
1
CONN_01X08
Conn_01x08
J10
1
FUSE_16V_2.5A
Fuse_16V_2.5A
F1
4
HF46F 12-HS1
K1, K2, K3, K4
1
470V
RV1
1
EN
SW1
4
SW_12X12MM_SMD
SW_12x12mm_SMD
SW2, SW3, SW4, SW5
2
SS34
D1, D3
8
LED_0805
D2, D4, D5, D6, D11, D12, D13, D14
Show 22 more
QtyPartRefs
4
SS210
D7, D8, D9, D10
1
10UH/5.6A
10uH/5.6A
L1
10
100NF/16V
100nF/16V
C1, C16, C17, C18, C19, C20, C25, C26 +2
2
10UF/25V
10uF/25V
C2, C9
2
10NF/50V
10nF/50V
C3, C8
2
47UF/16V
47uF/16V
C4, C5
1
4.7NF/50V
4.7nF/50V
C6
1
39PF/50V
39pF/50V
C7
2
10UF/16V
10uF/16V
C10, C13
6
1UF/16V
1uF/16V
C11, C12, C21, C22, C23, C24
2
22PF/50V
22pF/50V
C14, C15
1
100K/1%/1_10W
R1
2
2.49K/1%/1_10W
R2, R7
1
20K/1%/1_10W
R3
1
30K/1%/1_10W
R4
1
49.9K/1%/1_10W
R5
7
10K/1%/1_10W
R6, R10, R11, R13, R14, R16, R17
6
1K/1%/1_10W
R8, R12, R30, R31, R32, R33
5
220/1%/1_10W
R9, R18, R19, R24, R25
1
4.7/1%/1_10W
R15
4
2K2/1%/1_10W
R20, R21, R26, R27
4
47K/1%/1_10W
R22, R23, R28, R29

Auto Switch design files

The KiCad project lives in the VuLinh011218/Auto_Switch repository on GitHub; these links point at the commit this page was built from.

Auto Switch: common questions

What microcontroller does the Auto Switch use?

The Auto Switch is built around the STM32F103C8T6, from the STM32 family.

How big is the Auto Switch PCB?

The Auto Switch measures 100 × 67.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Auto Switch?

111 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Auto Switch design files?

From the VuLinh011218/Auto_Switch repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Auto Switch design in my own project?

The repository has no license, so all rights stay with VuLinh011218. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Auto Switch without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards