11 open source boards using the AM2302
Real designs built with the AM2302, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Lilygo
Ndambia
77.9 × 81.6 mm147 parts4LNo license0STM32
Auto Switch
VuLinh011218
100 × 67.2 mm111 parts2LNo license0ESP32
Smart-IoT-Sensor-Node
harshilgohil989-design
83.3 × 69 mm34 parts2LNo license0ESP32
OPAmp
Siddarth-Kota
83 × 90.2 mm30 parts2LNo license0ESP8266
Esp 12v
onkelpit
84.1 × 25 mm17 parts2LGPL-2.00AVR/Arduino
Air quality sensors
ma-rapp
55 × 46 mm11 parts2LMIT0ESP32
SensorNode-PCB-Design
Vinay-Kumbar
52 × 54 mm8 parts2LNo license0ESP32
Ai plant pot
Flamebamboo
30 × 58 mm5 parts2LNo license0ESP32
Lab Sensor V2
Siddarth-Kota
94.3 × 66 mm28 parts2LNo license0ESP32
Practice
wlatif-cmyk
77.5 × 106 mm7 parts2LNo license8ESP32
ESPProbe
Ehryk
47 × 44 mm16 parts2LBSD-3-Clause2
How designs wire the AM2302
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the AM2302 connects to, and the resistors, capacitors and other passives placed on it.
- The SDA pin has a pull-up to 3.3V on 6 of 10 designs, most often 10 kΩ (then 4.7 kΩ).
- The VDD pin has a decoupling capacitor on 4 of 10 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 80% · a signal 20% |
|
| SDApin 2 | Connected to: The microcontroller 80% |
|
| GNDpin 3, 4 | Connected to: GND 95% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Practiceschematic by wlatif-cmyk, ESPProbe by Ehryk, Ai plant pot by Flamebamboo and Smart-IoT-Sensor-Node by harshilgohil989-design.
The AM2302 in open source designs
The gallery holds 11 open source boards using the AM2302 from 10 GitHub repositories; a typical one measures about 77.8 × 66 mm and carries around 17 components.
91% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.
The most starred is Practiceschematic by wlatif-cmyk.
Parts used alongside the AM2302
Microcontrollers on boards using the AM2302
What boards using the AM2302 are built for
AM2302: common questions
Where can I find a AM2302 reference design?
Each of the 11 boards on this page is a real design using the AM2302. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the AM2302 SDA pin?
The SDA pin has a pull-up to 3.3V on 6 of 10 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 10 open source designs using the AM2302.
What decoupling capacitors do designs use on the AM2302 VDD pin?
The VDD pin has a decoupling capacitor on 4 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the AM2302.
Which microcontrollers do boards using the AM2302 use?
Most are built on ESP32 (8), AVR/Arduino (1), ESP8266 (1) and STM32 (1).
How big is a typical board using the AM2302?
The median is 77.8 × 66 mm, and 91% are two-layer designs.
What is the most popular open source board using the AM2302?
By GitHub stars, Practiceschematic by wlatif-cmyk, with 8 stars.
Can I simulate one of these boards using the AM2302 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.