Backup before update
WaIIer·waIIer47-keyboard·Kicad/keyboard/rgb47/backup_before_update.kicad_pcb
About the Backup before update PCB
Backup before update is an open source AVR/Arduino PCB design by WaIIer, published on GitHub under the MIT license. It is a 2-layer board measuring 229.4 × 92.6 mm, with 171 components from 18 distinct parts.
Its main chip is the ATMEGA32U4, from the AVR/Arduino family. By type, the board carries 95 diodes, 47 relays, 12 capacitors, 11 resistors, 1 IC and 1 crystal.
It belongs with the keyboards designs in this gallery.
From the project
Open Source Mechanical Keyboard Tutorial and PCB
See BOM.md The total cost for a Rev 2 PCB keybarod is:
Download and install Kicad from https://kicad-pcb.org/ During installation, choose to download Kicad's default libraries Clone the following two repositories (or download zip and extract): keyboardparts.pretty from https://github.com/tmk/keyboardparts.pretty keebs.pretty from https://github.com/egladman/keebs.pretty Type-C.pretty from https://github.com/ai03-2725/Type-C.pretty kicadlibtmk.lib https://github.com/tmk/kicadlib_tmk

Main components on the Backup before update
Backup before update bill of materials (BOM)
171 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA32U4 | LQFP-44_10x10mm_P0.8mm | U1 |
| 1 | XTAL | Crystal_SMD_HC49-SD_HandSoldering | X1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_GCT_USB4085 | J1 |
| 46 | KEYSW | Mx_Alps_100 | K1, K2, K3, K4, K5, K6, K7, K8 +38 |
| 1 | KEYSW | Mx_Alps_200 | K27 |
| 1 | PTC 1.5A | Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | PTC1 |
| 1 | SW_PUSH | SW_SPST_TL3342 | SW1 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LED1 |
| 48 | D | D_SOD123 | D1, D2, D3, D4, D5, D6, D7, D8 +40 |
| 47 | SK6812 | sk6812_mini_E_cuts | D48, D49, D50, D51, D52, D53, D54, D55 +39 |
| 2 | 22p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 8 | 0.1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4, C5, C6, C7, C8, C11, C12 |
| 1 | 10u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C9 |
| 1 | 1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C13 |
| 6 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R6, R7, R8, R9, R11 |
| 2 | 5.1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3 |
| 2 | 22 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5 |
| 1 | 220 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
Backup before update design files
The KiCad project lives in the WaIIer/waIIer47-keyboard repository on GitHub; these links point at the commit this page was built from.
Backup before update: common questions
What microcontroller does the Backup before update use?
The Backup before update is built around the ATMEGA32U4, from the AVR/Arduino family.
How big is the Backup before update PCB?
The Backup before update measures 229.4 × 92.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Backup before update?
171 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Backup before update design files?
From the WaIIer/waIIer47-keyboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Backup before update design in my own project?
Yes, under the terms of its MIT license, which WaIIer chose for the repository.
Can I test firmware for the Backup before update without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in waIIer47-keyboard
AVR/Arduino
New cols
WaIIer
229.4 × 92.6 mm171 parts2LMIT0AVR/Arduino
Rev1.0
WaIIer
229.4 × 92.6 mm171 parts2LMIT0AVR/Arduino
Component labels
WaIIer
229.4 × 92.6 mm171 parts2LMIT0AVR/Arduino
All connected
WaIIer
229.4 × 92.6 mm171 parts2LMIT0AVR/Arduino
New rgb
WaIIer
229.4 × 92.6 mm171 parts2LMIT0AVR/Arduino
Rgb47
WaIIer
229.4 × 92.6 mm170 parts2LMIT0AVR/Arduino
Backup before changing rgb footprint
WaIIer
229.4 × 92.6 mm170 parts2LMIT0AVR/Arduino
Backup changing footprint
WaIIer
229.4 × 92.6 mm169 parts2LMIT0AVR/Arduino
Usb
WaIIer
229.4 × 92.2 mm169 parts2LMIT0AVR/Arduino
Rows cols
WaIIer
3.2 × 2.8 mm169 parts2LMIT0AVR/Arduino
Cols wired
WaIIer
3.2 × 2.8 mm169 parts2LMIT0
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k