Capstone1

Wake-Up-It-s-a-Hospital·HW·PCB/capstone1/capstone1.kicad_pcb

Capstone1 PCB layout, top view — open source board by Wake-Up-It-s-a-Hospital

About the Capstone1 PCB

Capstone1 is an open source PCB design by Wake-Up-It-s-a-Hospital, published on GitHub. It is a 2-layer board measuring 340 × 340 mm, with 37 components from 31 distinct parts.

Other key parts include the R-78C9.0-1.0 and XL4015. By type, the board carries 15 connectors, 8 diodes, 4 resistors, 3 ICs, 3 capacitors and 2 transistors.

It belongs with the wearables designs in this gallery.

From the project

하드웨어를 설계하는 레포지토리입니다.

구동부, 손잡이부, 스마트 기능부에 해당하는 PCB 설계 및 회로도와 각각의 부분에 해당하는 HW 설계 및 3D modeling 등을 설계하였습니다.

본 레포지토리는 2025년 한국공학대학교 종합설계 (캡스톤디자인) 프로젝트와 한이음 프로젝트의 지원을 받아 개발되고 있습니다.

- 정육각형 구동부 상자의 면 역할인 아크릴 설계 도면 - 각종 PCB, 소자, 배터리, 폴대 장착에 맞추어 타공

- 각각 KiCAD를 사용해서 제작 - 별칭 - 구동부 : 1층 - 손잡이부 : 2층 - 카메라부 : 3층 - 스마트 기능부 : 4층 - 스마트 웨어러블 기기 : 시계부 - 1층* 을 제외한 모든 PCB 는 KiCAD 버전 8.0으로 작성됨.

- connector는 모두 molex 5264(수), 5267(암)을 사용함. - 전원 connector는 5557(수), 5566(암)을 사용함.

Capstone1, from the project README
From the project README

Main components on the Capstone1

R-78C9.0-1.0XL4015

Capstone1 bill of materials (BOM)

37 components, 31 distinct parts.

QtyPartRefs
1
R-78C9.0-1.0
U1
2
XL4015
U2, U3
1
2N3904
Q1
1
IRF9540N
Q4
1
12.8V Battery
J1
1
UART
J2
1
CN7
J3
1
14.6V Charge
J4
1
CN10
J5
1
SR04_1
J6
1
SR04_2
J7
1
SR04_3
J8
1
SR04_4
J9
1
SR04_5
J10
1
drive_VB
J11
1
drive_ctrl
J12
1
2F_POWER
J14
1
4F_POWER
J15
1
switch
J16
1
~
MPB-S-112-C1
Show 11 more
QtyPartRefs
1
~
TRA2L-5VCD-Z1
1
1N4148
D1
1
SR340
D2
5
1N4007
D3, D4, D5, D6, D7
1
MBR1060
D8
1
100uF
C1
2
10uF
C2, C3
1
1k
R1
1
3k
R2
1
11k
R3
1
10k
R4

Capstone1 design files

The KiCad project lives in the Wake-Up-It-s-a-Hospital/HW repository on GitHub; these links point at the commit this page was built from.

Capstone1: common questions

How big is the Capstone1 PCB?

The Capstone1 measures 340 × 340 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Capstone1?

37 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the Capstone1 design files?

From the Wake-Up-It-s-a-Hospital/HW repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Capstone1 design in my own project?

The repository has no license, so all rights stay with Wake-Up-It-s-a-Hospital. Use it as a reference, and ask the author before reusing the design.

More boards in HW

Similar boards