4thfloor pole
Wake-Up-It-s-a-Hospital·HW·PCB/4thfloor_pole/4thfloor_pole.kicad_pcb
About the 4thfloor pole PCB
4thfloor pole is an open source ESP32 PCB design by Wake-Up-It-s-a-Hospital, published on GitHub. It is a 2-layer board measuring 75 × 70 mm, with 10 components from 9 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the Load_cell_hx711. By type, the board carries 6 connectors, 2 ICs, 1 module and 1 capacitor.
It belongs with the wearables designs in this gallery.
From the project
하드웨어를 설계하는 레포지토리입니다.
구동부, 손잡이부, 스마트 기능부에 해당하는 PCB 설계 및 회로도와 각각의 부분에 해당하는 HW 설계 및 3D modeling 등을 설계하였습니다.
본 레포지토리는 2025년 한국공학대학교 종합설계 (캡스톤디자인) 프로젝트와 한이음 프로젝트의 지원을 받아 개발되고 있습니다.
- 정육각형 구동부 상자의 면 역할인 아크릴 설계 도면 - 각종 PCB, 소자, 배터리, 폴대 장착에 맞추어 타공
- 각각 KiCAD를 사용해서 제작 - 별칭 - 구동부 : 1층 - 손잡이부 : 2층 - 카메라부 : 3층 - 스마트 기능부 : 4층 - 스마트 웨어러블 기기 : 시계부 - 1층* 을 제외한 모든 PCB 는 KiCAD 버전 8.0으로 작성됨.
- connector는 모두 molex 5264(수), 5267(암)을 사용함. - 전원 connector는 5557(수), 5566(암)을 사용함.

Main components on the 4thfloor pole
4thfloor pole bill of materials (BOM)
10 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Load_cell_hx711 | loadcell | U1, U2 |
| 1 | ESP32-WROOM-32 Espressif Systems | ESP32_new_modified | MOD1 |
| 1 | NEXTION_DISPLAY | Molex_SPOX_5267-04A_1x04_P2.50mm_Vertical | J1 |
| 1 | LOADCELL_LEFT | Molex_SPOX_5267-04A_1x04_P2.50mm_Vertical | J2 |
| 1 | LOADCELL_RIGHT | Molex_SPOX_5267-04A_1x04_P2.50mm_Vertical | J3 |
| 1 | STATE_LED_LEFT | Molex_SPOX_5267-02A_1x02_P2.50mm_Vertical | J4 |
| 1 | MAIN_POWER | Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical | J5 |
| 1 | STATE_LED_RIGHT | Molex_SPOX_5267-02A_1x02_P2.50mm_Vertical | J6 |
| 1 | 1000pF | C_Disc_D9.0mm_W2.5mm_P5.00mm | C1 |
4thfloor pole design files
The KiCad project lives in the Wake-Up-It-s-a-Hospital/HW repository on GitHub; these links point at the commit this page was built from.
4thfloor pole: common questions
What microcontroller does the 4thfloor pole use?
The 4thfloor pole is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the 4thfloor pole PCB?
The 4thfloor pole measures 75 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 4thfloor pole?
10 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the 4thfloor pole design files?
From the Wake-Up-It-s-a-Hospital/HW repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 4thfloor pole design in my own project?
The repository has no license, so all rights stay with Wake-Up-It-s-a-Hospital. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 4thfloor pole without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in HW
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k