Wazuka crossing
wazuka-rail·wazuka-crossing·KiCad/simple/simple.kicad_pcb
About the Wazuka crossing PCB
Wazuka crossing is an open source PIC PCB design by wazuka-rail, published on GitHub under the MIT license. It is a 2-layer board measuring 26.4 × 13.7 mm, with 7 components from 6 distinct parts.
Its main chip is the PIC16F15213T-I/SN, from the PIC family. By type, the board carries 2 diodes, 2 resistors, 1 IC, 1 speaker and 1 capacitor.
From the project
踏切のミニチュア / Miniature of a Japanese-style level crossing

Main components on the Wazuka crossing
Wazuka crossing bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC16F15213T-I/SN PIC16F15213T-I_SN | SO-8_3.9x4.9mm_P1.27mm | IC1 |
| 1 | PKLCS1212E2000-R1 | PKLCS1212E2000-R1 | LS1 |
| 2 | RED | LED_0603_1608Metric | D1, D2 |
| 1 | 0.1u | C_0603_1608Metric | C1 |
| 1 | 1k | R_0603_1608Metric | R1 |
| 1 | 100 | R_0603_1608Metric | R2 |
Wazuka crossing design files
The KiCad project lives in the wazuka-rail/wazuka-crossing repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCad/simple/simple.kicad_pcb
- SchematicKiCad/simple/simple.kicad_sch
Wazuka crossing: common questions
What microcontroller does the Wazuka crossing use?
The Wazuka crossing is built around the PIC16F15213T-I/SN, from the PIC family.
How big is the Wazuka crossing PCB?
The Wazuka crossing measures 26.4 × 13.7 mm, has 2 copper layers and is 1.59 mm thick.
How many components are on the Wazuka crossing?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Wazuka crossing design files?
From the wazuka-rail/wazuka-crossing repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Wazuka crossing design in my own project?
Yes, under the terms of its MIT license, which wazuka-rail chose for the repository.
Can I test firmware for the Wazuka crossing without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379