FSAE Board 2023
wazzu-racing·Racing_HUD·circuitDiagrams_kiCadFiles/WSUPCB_CC/FSAE board 2/FSAE board 2.kicad_pcb
About the FSAE Board 2023
FSAE Board 2023 is an open source AVR/Arduino PCB design by wazzu-racing, published on GitHub. It is a 2-layer board measuring 43.2 × 85.1 mm, with 14 components from 11 distinct parts.
Its main chip is the ATmega644A-P, from the AVR/Arduino family. Other key parts include the LD1086DT50TR and MCP2515. By type, the board carries 4 connectors, 4 capacitors, 3 ICs, 2 resistors and 1 crystal.
From the project
ECU - Arduino CAN comuunicaiton Display for important run time info I/O Availible for DATA_AC to use
Main components on the FSAE Board 2023
FSAE Board 2023 bill of materials (BOM)
14 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LD1086DT50TR | TO-252-2 | U1 |
| 1 | MCP2515 | DIP-18_W7.62mm_Socket | U2 |
| 1 | ATmega644A-P | DIP-40_W15.24mm | U3 |
| 1 | ACO-20MHz-A | Oscillator_DIP-14 | X1 |
| 1 | Conn_02x02_Odd_Even | PinSocket_2x02_P2.00mm_Vertical | J1 |
| 1 | CAN BOB | PinHeader_1x04_P2.00mm_Vertical | J2 |
| 1 | 7Seg con | PinSocket_1x05_P2.00mm_Vertical | J3 |
| 1 | USB UART BOB | PinHeader_1x06_P2.00mm_Vertical | J4 |
| 3 | 10u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C4 |
| 1 | 100n | C_Disc_D3.0mm_W1.6mm_P2.50mm | C3 |
| 2 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
FSAE Board 2023 design files
The KiCad project lives in the wazzu-racing/Racing_HUD repository on GitHub; these links point at the commit this page was built from.
FSAE Board 2023: common questions
What microcontroller does the FSAE Board 2023 use?
The FSAE Board 2023 is built around the ATmega644A-P, from the AVR/Arduino family.
How big is the FSAE Board 2023?
The FSAE Board 2023 measures 43.2 × 85.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FSAE Board 2023?
14 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the FSAE Board 2023 design files?
From the wazzu-racing/Racing_HUD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the FSAE Board 2023 design in my own project?
The repository has no license, so all rights stay with wazzu-racing. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the FSAE Board 2023 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Racing_HUD
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k