ImpedanceP2
wenkeli·impedance_meter·hardware/impedanceP2/impedanceP2.kicad_pcb
About the ImpedanceP2 PCB
ImpedanceP2 is an open source PCB design by wenkeli, published on GitHub. It is a 2-layer board measuring 98 × 79.6 mm, with 69 components from 31 distinct parts.
Other key parts include the MC34063, ISL9111, LM324QUAD and PCA9306. By type, the board carries 35 resistors, 12 capacitors, 6 ICs, 5 connectors, 3 inductors and 2 transistors.
From the project
Electronics to measure the resistance of multi-channel animal electrodes
Electronics to measure the resistance of multi-channel animal electrodes
This project uses the Analog Devices AD5934 impedance measurement chip with the STM32 micro-controller to measure 32 channel tetrode channel assemblies, and the ability to pass up to 5uA of current through a 2 MOhm electrode, useful for lesioning the tissue surrounding the electrodes.
The firmware folder contains the STM32 MCU code for controlling the AD5934 chip and defines the user interface on the touch screen.
Main components on the ImpedanceP2
ImpedanceP2 bill of materials (BOM)
69 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MC34063 | SOIC8 | U1 |
| 1 | ISL9111 | SOT23_6 | U2 |
| 3 | LM324QUAD | TSSOP14 | U3, U4, U5 |
| 1 | PCA9306 | SM8 | U6 |
| 2 | DMG2307L-7 | DMG2307L | Q1, Q2 |
| 2 | RJ45 | RJ45_8 | J1, J2 |
| 1 | USB | USB_MINI_B | J3 |
| 2 | CONN_24X2 | PIN_ARRAY_24X2 | P2, P3 |
| 1 | ELK-E333FA | ELK_FILTER | FI1 |
| 1 | MCP73831 | SOT23-5 | MCP1 |
| 1 | Val** | PIN_ARRAY_1 | PIN_ARRAY_1 |
| 1 | SWITCH_INV | EG1224 | SW1 |
| 1 | LED | SM0603 | D1 |
| 1 | B220A | DO-214AC(SMA) | D3 |
| 1 | 4.7uH | SMD_CDR_INDUCTOR | L1 |
| 2 | 33uH | SLF_INDUCTOR | L3, L4 |
| 6 | 4.7uF | SM0603_Capa | C1, C2, C4, C5, C10, C13 |
| 2 | 10uF | SM0603_Capa | C3, C11 |
| 3 | 100uF | SM1210 | C6, C8, C9 |
| 1 | 300pF | SM0603_Capa | C7 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 300 | SM0603_Resistor | R1 |
| 1 | 2K | SM0603_Resistor | R2 |
| 2 | 100K | SM0603_Resistor | R3, R35 |
| 11 | 47K | SM0603_Resistor | R4, R5, R10, R11, R20, R21, R22, R23 +3 |
| 1 | 0.42 | SM0805 | R6 |
| 1 | 180 | SM0805 | R7 |
| 1 | 10K | SM0603_Resistor | R8 |
| 1 | 71.5K | SM0603_Resistor | R9 |
| 11 | 95.3K | SM0603_Resistor | R12, R13, R14, R15, R16, R17, R18, R19 +3 |
| 4 | 4.7K | SM0603_Resistor | R28, R29, R32, R33 |
| 1 | 200K | SM0603_Resistor | R31 |
ImpedanceP2 design files
The KiCad project lives in the wenkeli/impedance_meter repository on GitHub; these links point at the commit this page was built from.
ImpedanceP2: common questions
How big is the ImpedanceP2 PCB?
The ImpedanceP2 measures 98 × 79.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ImpedanceP2?
69 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the ImpedanceP2 design files?
From the wenkeli/impedance_meter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ImpedanceP2 design in my own project?
The repository has no license, so all rights stay with wenkeli. Use it as a reference, and ask the author before reusing the design.