18 open source boards using the MC34063
Real designs built with the MC34063, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Freifunk open mppt
elektra42
61 parts2LCustom license89- schematic only · 244 partsAVR/Arduino
PhotonSaw
openspaceaarhus
244 partsApache-2.013 ESP32
ISEMS-ESP32
ISEMS
96.3 × 93.6 mm67 parts2LNo license11STM32
Parkbrake
mumme74
101.6 × 114.3 mm353 parts2LNo license7AVR/Arduino
Tandy1400
arlaneenalra
173.4 × 62.1 mm39 parts2LCC-BY-SA-4.07STM32
Timer-RTC-STM32-Tm1638
nhantt92
93 × 61 mm125 parts2LNo license6ImpedanceP2
wenkeli
98 × 79.6 mm69 parts2LNo license1Sub
takeyamayuki
218 × 128.8 mm119 parts2LMIT0ESP8266
E-Ink Dashbord
mlisak
64.5 × 55.4 mm60 parts2LMIT0AVR/Arduino
ControllerBoardSMDPSU
Fredovsky
139 × 34 mm51 parts2LNo license0GD Power Supply Proto
baldengineer
135.2 × 46.8 mm117 parts4LMIT33NXP
Airsuspension controller
mumme74
109.2 × 114.3 mm132 parts2LNo license7Power supply
Ciprian-LocalPulse
90 × 55 mm12 parts2LMIT1STM32
Hw cpu
andreili
150 × 75.4 mm100 parts2LGPL-3.066BPI-AddOn
GBert
100 × 100 mm94 parts2LNo license99LCD-OLinuXino-5TS Rev.B
DrYouu
90 × 38 mm32 parts2LNo license0LCD-OLinuXino-5TS
DrYouu
90 × 38 mm29 parts2LNo license0PIC
Ardpicprog smd
tomaskovacik
69.2 × 54 mm33 parts2LCustom license27
How designs wire the MC34063
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the MC34063 connects to, and the resistors, capacitors and other passives placed on it.
- The CINV pin has a series resistor on 10 of 13 designs, most often 10 kΩ (then 27 kΩ).
- The CINV pin has a resistor to GND on 9 of 13 designs, most often 1.2 kΩ (then 1 kΩ).
- The CT pin has a capacitor to GND on 8 of 13 designs, most often 680 pF (then 68 pF).
- The DRC pin has a series resistor on 8 of 13 designs, most often 10 kΩ (then 180 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SWCpin 1 | Connected to: Signal 100% |
|
| CTpin 3 | Connected to: Signal 100% |
|
| GNDpin 4 | Connected to: GND 71% · a signal 21% | — |
| CINVpin 5 | Connected to: Signal 100% |
|
| VCCpin 6 | Connected to: 12V 50% · a signal 50% |
|
| ISNSpin 7 | Connected to: Signal 92% |
|
| DRCpin 8 | Connected to: Signal 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BPI-AddOn by GBert, Freifunk open mppt by elektra42, Hw cpu by andreili and GD Power Supply Proto by baldengineer.
The MC34063 in open source designs
The gallery holds 18 open source boards using the MC34063 from 16 GitHub repositories; a typical one measures about 99 × 61.6 mm and carries around 68 components.
94% are two-layer designs, the rest use four layers or more, and 39% carry an open source license.
The most starred is BPI-AddOn by GBert.
Parts used alongside the MC34063
What boards using the MC34063 are built for
MC34063: common questions
Where can I find a MC34063 reference design?
Each of the 18 boards on this page is a real design using the MC34063. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the MC34063 CINV pin?
The CINV pin has a series resistor on 10 of 13 designs, most often 10 kΩ (then 27 kΩ). Counted from the KiCad layouts of 14 open source designs using the MC34063.
How is the MC34063 CT pin connected?
The CT pin has a capacitor to GND on 8 of 13 designs, most often 680 pF (then 68 pF). Counted from the KiCad layouts of 14 open source designs using the MC34063.
What resistor goes on the MC34063 DRC pin?
The DRC pin has a series resistor on 8 of 13 designs, most often 10 kΩ (then 180 Ω). Counted from the KiCad layouts of 14 open source designs using the MC34063.
Which microcontrollers do boards using the MC34063 use?
Most are built on AVR/Arduino (4), STM32 (3), ESP32 (1) and ESP8266 (1).
How big is a typical board using the MC34063?
The median is 99 × 61.6 mm, and 94% are two-layer designs.
What is the most popular open source board using the MC34063?
By GitHub stars, BPI-AddOn by GBert, with 99 stars.
Can I simulate one of these boards using the MC34063 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.