Business card
whateverany-org·business-card
About the Business card PCB
Business card is an open source PCB design by whateverany-org, published on GitHub under the Unlicense license. It is a 2-layer board measuring 90 × 54.5 mm, with 44 components from 22 distinct parts.
Other key parts include the JW5211, F1C100s and AT25SF081-SSHD-X. By type, the board carries 18 capacitors, 12 resistors, 5 ICs, 3 inductors, 1 transistor and 1 crystal.
From the project
rm -rf .venv/ python3 -m venv --system-site-packages .venv source .venv/bin/activate ```
Main components on the Business card
Business card bill of materials (BOM)
44 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | JW5211 | SOT-23-5 | U4, U5, U6 |
| 1 | F1C100s | QFN-88_EP_10x10_Pitch0.4mm | U7 |
| 1 | AT25SF081-SSHD-X | SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | Q_NMOS_GSD | SOT-23 | Q1 |
| 1 | 24MHz | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_02x04_Counter_Clockwise | SOIC_clipProgSmall | J1 |
| 1 | Polyfuse | Fuse_0805_2012Metric | F1 |
| 1 | SW_Push | SW_SPST_FSMSM | SW1 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 3 | 2u2 | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1, L2, L3 |
| 2 | 2u2 | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6 |
| 1 | 2u2 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 10 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C9, C10, C11, C13, C17, C18, C19 +2 |
| 3 | 22u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C14, C15, C16 |
| 2 | 30p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C24, C25 |
| 3 | 11k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3 |
| 3 | 49k9 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R9, R10 |
| 1 | 36k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 1 | 8k2 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
| 2 | 2k2 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11 |
| 1 | 3k3 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13 |
Business card design files
The KiCad project lives in the whateverany-org/business-card repository on GitHub; these links point at the commit this page was built from.
- Layoutbusiness-card.kicad_pcb
- Schematicbusiness-card.kicad_sch
Business card: common questions
How big is the Business card PCB?
The Business card measures 90 × 54.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Business card?
44 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Business card design files?
From the whateverany-org/business-card repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Business card design in my own project?
Yes, under the terms of its Unlicense license, which whateverany-org chose for the repository.