13 open source boards using the AT25SF081-SSHD-X

Real designs built with the AT25SF081-SSHD-X, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the AT25SF081-SSHD-X

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the AT25SF081-SSHD-X connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 7 of 12 designs, most often 100 nF (then 1 µF).
  • The CS pin has a pull-up to 3.3V on 5 of 12 designs, most often 10 kΩ (then 3.3 kΩ).
CSpin 1Connected to: The microcontroller 75%, a connector 42%
  • Pull-up to 3.3V on 42% · 10 kΩ (3), 3.3 kΩ (1)
GNDpin 4Connected to: GND 100%
HOLD/IO3pin 7Connected to: The microcontroller 33% · 3.3V 33%
  • Pull-up to 3.3V on 33% · 10 kΩ (3), 100 kΩ (1)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 58% · 100 nF (8), 1 µF (1), 2.2 µF (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CM4ClusterHat by will127534, HUB75E ICE40 by riktw, VNA by joshajohnson and 180516-Elektor LoRa Node by ElektorLabs.

The AT25SF081-SSHD-X in open source designs

The gallery holds 13 open source boards using the AT25SF081-SSHD-X from 12 GitHub repositories; a typical one measures about 90 × 54.5 mm and carries around 78 components.

77% are two-layer designs, the rest use four layers or more, and 77% carry an open source license.

The most starred is CM4ClusterHat by will127534.

Microcontrollers on boards using the AT25SF081-SSHD-X

AT25SF081-SSHD-X: common questions

Where can I find a AT25SF081-SSHD-X reference design?

Each of the 13 boards on this page is a real design using the AT25SF081-SSHD-X. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the AT25SF081-SSHD-X VCC pin?

The VCC pin has a decoupling capacitor on 7 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the AT25SF081-SSHD-X.

What pull-up resistor is used on the AT25SF081-SSHD-X CS pin?

The CS pin has a pull-up to 3.3V on 5 of 12 designs, most often 10 kΩ (then 3.3 kΩ). Counted from the KiCad layouts of 12 open source designs using the AT25SF081-SSHD-X.

What parts are used alongside the AT25SF081-SSHD-X?

The 74LCX07, F1C100s, ICE40HX1K-VQ100, RP2040 and SN74LVC8T245DWR appear in the most repositories here.

Which microcontrollers do boards using the AT25SF081-SSHD-X use?

Most are built on FPGA (4), RP2040/RP2350 (3), STM32 (2) and ESP32 (1).

How big is a typical board using the AT25SF081-SSHD-X?

The median is 90 × 54.5 mm, and 77% are two-layer designs.

What is the most popular open source board using the AT25SF081-SSHD-X?

By GitHub stars, CM4ClusterHat by will127534, with 95 stars.

Can I simulate one of these boards using the AT25SF081-SSHD-X before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part