STPM32 Energy Metering Breakout
whatnick·STPM3x_Breakout·hardware/STPM32_Breakout/STPM32_Breakout.kicad_pcb
About the STPM32 Energy Metering Breakout
STPM32 Energy Metering Breakout is an open source PCB design by whatnick, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38.2 × 28 mm, with 27 components from 16 distinct parts.
Other key parts include the STPM32TR. By type, the board carries 12 resistors, 10 capacitors, 1 IC, 1 crystal, 1 connector and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
KiCad 10 breakout boards for the STPM32, STPM33, and STPM34 energy metering ICs
Compact KiCad 10 development board for the single-voltage, single-current STMicroelectronics STPM32 energy-metering ASIC.
- Current input: 100 A:50 mA current-output CT. - Burden: 2.4 ohm differential, producing 120 mV RMS at 100 A. - Current filter: 100 ohm series and 330 nF shunt on each differential leg, approximately 4.8 kHz. - Voltage input: isolated 9 VAC transformer secondary. - Voltage divider: 200 kohm / 2.49 kohm on each conductor, approximately 81.3:1 differential scaling. - Voltage filter: 1 kohm series and 33 nF shunt on each differential leg, approximately 4.8 kHz. - Clock: 16…

Main components on the STPM32 Energy Metering Breakout
STPM32 Energy Metering Breakout bill of materials (BOM)
27 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STPM32TR STPM32 STMicroelectronics | VQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm | U1 |
| 1 | X322516MOB4SI 16MHz YXC | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | PZ254V-11-12P BREADBOARD I/O XFCN | PinHeader_1x12_P2.54mm_Vertical | J1 |
| 1 | RC0603FR-072R4L 2.4R YAGEO | R_0603_1608Metric | RB1 |
| 1 | RS-282G05A3-SMRT RESET C&K | SW_SPST_CK_RS282G05A3 | SW1 |
| 2 | TCC0603X7R334K500CT 330n CCTC | C_0603_1608Metric | C1, C2 |
| 2 | CL10B333KB8NNNC 33n Samsung Electro-Mechanics | C_0603_1608Metric | C3, C4 |
| 2 | CL21B105KAFNNNE 1u Samsung Electro-Mechanics | C_0805_2012Metric | C9, C10 |
| 1 | CL21A475KOFNNNG 4.7u Samsung Electro-Mechanics | C_0805_2012Metric | C11 |
| 1 | CL10B104KB8NNNC 100n Samsung Electro-Mechanics | C_0603_1608Metric | C12 |
| 2 | CL10C150JB8NNNC 15p Samsung Electro-Mechanics | C_0603_1608Metric | C13, C14 |
| 2 | RC0603FR-07100RL 100R YAGEO | R_0603_1608Metric | R1, R2 |
| 4 | RT0603BRD07100KL 100k YAGEO | R_0603_1608Metric | R3, R4, R6, R7 |
| 2 | RT0603BRD072K49L 2.49k YAGEO | R_0603_1608Metric | R5, R8 |
| 2 | RC0603FR-071KL 1k YAGEO | R_0603_1608Metric | R9, R10 |
| 2 | RC0603FR-0710KL 10k YAGEO | R_0603_1608Metric | R11, R12 |
STPM32 Energy Metering Breakout design files
The KiCad project lives in the whatnick/STPM3x_Breakout repository on GitHub; these links point at the commit this page was built from.
STPM32 Energy Metering Breakout: common questions
How big is the STPM32 Energy Metering Breakout?
The STPM32 Energy Metering Breakout measures 38.2 × 28 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STPM32 Energy Metering Breakout?
27 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STPM32 Energy Metering Breakout design files?
From the whatnick/STPM3x_Breakout repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the STPM32 Energy Metering Breakout design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which whatnick chose for the repository.
More boards in STPM3x_Breakout
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979