Number 1 good boy
Wheeler1711·kicad·number_1_good_boy/number_1_good_boy.kicad_pcb
About the Number 1 good boy PCB
Number 1 good boy is an open source PCB design by Wheeler1711, published on GitHub. It is a 2-layer board measuring 38.1 × 38.1 mm, with 19 components from 9 distinct parts.
Other key parts include the NE555 and 4017. By type, the board carries 10 diodes, 3 resistors, 2 ICs, 2 capacitors, 1 connector and 1 battery holder.
From the project
One day my number 1 good boy, through no fault of his own, lost all of his doggo tags. So naturally, instead of simply buying him a new dog tag at minimal cost and effort, I decided to make a special dog tag for my special boy so that everyone would know just how special he is. I
One day my number 1 good boy, through no fault of his own, lost all of his doggo tags. So naturally, instead of simply buying him a new dog tag at minimal cost and effort, I decided to make a special dog tag for my special boy so that everyone would know just how special he is. I mean just look at how cute he is at the park...
Anyway, resisting the urge to post a thousand good boy pictures... I decided I wanted some blinking LEDs and after a bit of googling ended up deciding on an LED chaser circuit e.g. Nuts and Volts or Electro Schematics.

Main components on the Number 1 good boy
Number 1 good boy bill of materials (BOM)
19 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | 4017 | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | XLR3_SWITCHED XLR3_Switched | surface_mount_switch_SK-3296S-01-L2 | J1 |
| 1 | Battery_Cell | BatteryHolder_Keystone_1058_1x2032 | BT1 |
| 10 | LED | LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 1 | C57112 CAP 0.01uF | C_0603_1608Metric | C1 |
| 1 | C19702 C 10uF | C_0603_1608Metric | C2 |
| 1 | C4190 R 2.2K | R_0603_1608Metric | R1 |
| 2 | C25804 R 10K | R_0603_1608Metric | R2, R3 |
Number 1 good boy design files
The KiCad project lives in the Wheeler1711/kicad repository on GitHub; these links point at the commit this page was built from.
Number 1 good boy: common questions
How big is the Number 1 good boy PCB?
The Number 1 good boy measures 38.1 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Number 1 good boy?
19 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Number 1 good boy design files?
From the Wheeler1711/kicad repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Number 1 good boy design in my own project?
The repository has no license, so all rights stay with Wheeler1711. Use it as a reference, and ask the author before reusing the design.
More boards in kicad
Led mapper CCAT
Wheeler1711
127.1 × 73.4 mm578 parts2LNo license0Mega led mapper shield
Wheeler1711
116.8 × 114.3 mm65 parts2LNo license0CCAT 350 GHz PCB 1 v2
Wheeler1711
70.9 × 101 mm24 parts2LNo license0CCAT 350 GHz PCB 2 v2
Wheeler1711
71 × 101 mm12 parts2LNo license0Bias T launch
Wheeler1711
12 × 12 mm5 parts2LNo license0Bias T launch cpw
Wheeler1711
12 × 12 mm5 parts2LNo license0UVhash lower
Wheeler1711
47.6 × 44.5 mm3 parts4LNo license0