Uv light
winedarksea·uv_light
About the Uv light PCB
Uv light is an open source PCB design by winedarksea, published on GitHub. It is a 2-layer board measuring 49.2 × 49.2 mm, with 68 components from 25 distinct parts.
Other key parts include the HUSB238, LM393 and TL431DBZ. By type, the board carries 27 diodes, 15 capacitors, 14 resistors, 5 transistors, 3 ICs and 2 switches.
From the project
Custom Sun Lamp
A heatsink is important. All 16 leds are too much, unfortunately.
Problem: the comparator circuit for voltage sensing doesn't work properly, and needs a look at.
Minor problem: there's one trace that is bridged by the heatsink here. Using a non conductive thermal pad between the pcb and heatsink solves that problem, or redesign.
Recommendation: add a switch to the UV circuit as well. Also perhaps use larger switches than those specced here if you intend to switch the active lights often.

Main components on the Uv light
Uv light bill of materials (BOM)
68 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HUSB238 C7471904 | DFN-10-1EP_3x3mm_P0.5mm_EP1.65x2.38mm | U1 |
| 1 | LM393 C7955 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TL431DBZ C3113 | SOT-23 | U3 |
| 3 | AO3401A C15127 | SOT-23 | Q1, Q4, Q5 |
| 2 | P-Channel DFN-8 C541711 | TRANS_AONR21307 | Q2, Q3 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 C165948 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | SW_SPDT C128955 | SW_SPDT_PCM12 | SW1, SW2 |
| 1 | TP | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | TP1 |
| 3 | FR_LED | LED_PLCC_2835_Handsoldering | D1, D2, D3 |
| 1 | UV_LED | LED_Cree-XHP35 | D4 |
| 4 | G_LED | LED_SMD3030 | D5, D6, D9, D10 |
| 16 | W_LED | LED_SMD3030 | D7, D8, D11, D12, D13, D14, D15, D16 +8 |
| 1 | SM712_SOT23 C32677 | SOT-23 | D21 |
| 1 | GI_LED C2297 | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D26 |
| 1 | RI_LED C2286 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D27 |
| 14 | 1 uF 50V X5R C15849 | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +6 |
| 1 | 10 nF 50V X7R C15195 | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C15 |
| 1 | 33 C23140 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 10 C17415 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 3 | 200K C25764 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R11, R12 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.53K C321916 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R6 |
| 1 | 10K C25804 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 180 C22828 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 4 | 680 C17798 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R13, R14 |
| 1 | 2K7 C13167 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
Uv light design files
The KiCad project lives in the winedarksea/uv_light repository on GitHub; these links point at the commit this page was built from.
- Layoutuv_light.kicad_pcb
- Schematicuv_light.kicad_sch
- BOMuv_light_BOM.csv
Uv light: common questions
How big is the Uv light PCB?
The Uv light measures 49.2 × 49.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Uv light?
68 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Uv light design files?
From the winedarksea/uv_light repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Uv light design in my own project?
The repository has no license, so all rights stay with winedarksea. Use it as a reference, and ask the author before reusing the design.