13 open source boards using the HUSB238
Real designs built with the HUSB238, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Low noise power probe
blinken
69.7 × 114.8 mm105 parts6LCC-BY-SA-4.0101Burnwing
CubeSource
68.8 × 22.9 mm48 parts2LNo license4HRDW-PDTrigger HUSB238
Freimor
15.2 × 25.4 mm17 parts2LMIT3ESP32
Base board
jorisplusplus
119.8 × 129.8 mm230 parts6LNo license0RP2040/RP2350
DIY T12 iron
anshchawla521
97 × 67 mm90 parts2LNo license0Uv light
winedarksea
49.2 × 49.2 mm68 parts2LNo license0USB-C-PD-Board
ADITHYANWUU2
40 × 30 mm11 parts2LMIT0Pi cemaker
georgestephanis
85 × 56 mm1 parts4LNo license0- schematic only · 65 parts
LazerGamebox
7kasper
65 partsNo license0 Low noise power probe panel
blinken
149.4 × 124.8 mm105 parts6LCC-BY-SA-4.0101PowerSupply
HelloAlex4
42.7 × 39.8 mm48 parts2LCC-BY-NC-4.010Ioboard head
jorisplusplus
119.8 × 129.8 mm225 parts4LNo license0ESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3k
How designs wire the HUSB238
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the HUSB238 connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a capacitor to GND on 6 of 8 designs, most often 1 µF (then 10 µF).
- The VSET pin has a resistor to GND on 6 of 8 designs, most often 10 kΩ (then 0 Ω).
- The ISET pin has a resistor to GND on 6 of 8 designs, most often 14 kΩ (then 22.6 kΩ).
- The GATE pin has a series resistor on 6 of 8 designs, most often 5.1 kΩ (then 6.04 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: Signal 75% · VIN 25% |
|
| VSETpin 8 | Connected to: Signal 100% |
|
| ISETpin 9 | Connected to: Signal 100% |
|
| GATEpin 10 | Connected to: Signal 75% · not connected 25% |
|
| GNDpin 11 | Connected to: GND 75% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Powertrain by byrantech, Low noise power probe by blinken, PowerSupply by HelloAlex4 and Burnwing by CubeSource.
The HUSB238 in open source designs
The gallery holds 13 open source boards using the HUSB238 from 11 GitHub repositories; a typical one measures about 69.2 × 52.6 mm and carries around 68 components.
50% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is Powertrain by byrantech.
Parts used alongside the HUSB238
Microcontrollers on boards using the HUSB238
What boards using the HUSB238 are built for
HUSB238: common questions
Where can I find a HUSB238 reference design?
Each of the 13 boards on this page is a real design using the HUSB238. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the HUSB238 VIN pin connected?
The VIN pin has a capacitor to GND on 6 of 8 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the HUSB238.
What resistor goes on the HUSB238 VSET pin?
The VSET pin has a resistor to GND on 6 of 8 designs, most often 10 kΩ (then 0 Ω). Counted from the KiCad layouts of 8 open source designs using the HUSB238.
What resistor goes on the HUSB238 ISET pin?
The ISET pin has a resistor to GND on 6 of 8 designs, most often 14 kΩ (then 22.6 kΩ). Counted from the KiCad layouts of 8 open source designs using the HUSB238.
Which microcontrollers do boards using the HUSB238 use?
Most are built on ESP32 (2) and RP2040/RP2350 (1).
How big is a typical board using the HUSB238?
The median is 69.2 × 52.6 mm, and 50% are two-layer designs.
What is the most popular open source board using the HUSB238?
By GitHub stars, Powertrain by byrantech, with 4,264 stars.
Can I simulate one of these boards using the HUSB238 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.