Watercooled-Pi5-Baseboard
wiretap-retro·Watercooled-Pi5-Baseboard·Pi5-wc-board/watercooled-pi-120mm.kicad_pcb
About the Watercooled-Pi5-Baseboard PCB
Watercooled-Pi5-Baseboard is an open source AVR/Arduino PCB design by wiretap-retro, published on GitHub under the Unlicense license. It is a 2-layer board measuring 120 × 120 mm, with 33 components from 9 distinct parts.
Its main chip is the ARDUINO_NANO, from the AVR/Arduino family. By type, the board carries 14 resistors, 13 diodes, 4 connectors and 1 fuse.
It belongs with the displays & leds designs in this gallery.
From the project
A baseboard for setting up a watercooled Raspberry Pi 5.

Watercooled-Pi5-Baseboard bill of materials (BOM)
33 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 47053-3000 Molex | 470533000 | J0, J1 |
| 1 | 694106301002 Wurth Elektronik | 694106301002_1 | J2 |
| 1 | M20-7820446 Conn_01x04 Harwin | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | 1206L400/12SLWR 1206L400_12SLWR LITTELFUSE | 1206L075SLYR | F0 |
| 1 | ARDUINO_NANO Arduino | Arduino_Nano_Socket | TB0 |
| 1 | 1N4007 Diotec Semiconductor | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 12 | LED_Small | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4, D5, D6, D7, D8, D9 +4 |
| 2 | 3362P-1-103 Bourns | 3362P_1 | R0, R1 |
| 12 | R_Small | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3, R4, R5, R6, R7, R8, R9 +4 |
Watercooled-Pi5-Baseboard design files
The KiCad project lives in the wiretap-retro/Watercooled-Pi5-Baseboard repository on GitHub; these links point at the commit this page was built from.
Watercooled-Pi5-Baseboard: common questions
What microcontroller does the Watercooled-Pi5-Baseboard use?
The Watercooled-Pi5-Baseboard is built around the ARDUINO_NANO, from the AVR/Arduino family.
How big is the Watercooled-Pi5-Baseboard PCB?
The Watercooled-Pi5-Baseboard measures 120 × 120 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Watercooled-Pi5-Baseboard?
33 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Watercooled-Pi5-Baseboard design files?
From the wiretap-retro/Watercooled-Pi5-Baseboard repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Watercooled-Pi5-Baseboard design in my own project?
Yes, under the terms of its Unlicense license, which wiretap-retro chose for the repository.
Can I test firmware for the Watercooled-Pi5-Baseboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k