Pi eliminator
wittend·pi-eliminator
About the Pi eliminator PCB
Pi eliminator is an open source PCB design by wittend, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 70 × 50 mm, with 6 components from 4 distinct parts.
Other key parts include the C498153. By type, the board carries 4 capacitors, 1 IC and 1 connector.
It belongs with the usb & debug tools designs in this gallery.
From the project
A simple USB to Raspberry Pi I2C adapter For the PSWS projects
Hardware design for the Pi-Eliminator, a component of the Personal Space Weather Station (PSWS) project. Official documentation for this project can be found at pi-eliminator. ## Overview
The Pi-Eliminator is designed to interface with SDR hardware, specifically related to the ClementineSDR and projects involving the LTC2208 ADC. It appears to serve as an interface or replacement for Raspberry Pi-based setups in these systems, featuring standard 2x20 pin headers.
Main components on the Pi eliminator
Pi eliminator bill of materials (BOM)
6 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C498153 1117MP-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | C160404 Qwiic | JST_SM04B-SRSS-TB_LF__SN_ | J2 |
| 2 | C1592 1uF | C_0603_1608Metric | C1, C4 |
| 2 | C1590 100nF | C_0603_1608Metric | C2, C3 |
Pi eliminator design files
The KiCad project lives in the wittend/pi-eliminator repository on GitHub; these links point at the commit this page was built from.
- Layoutpi-eliminator.kicad_pcb
- Schematicpi-eliminator.kicad_sch
- BOMproduction/bom.csv
Pi eliminator: common questions
How big is the Pi eliminator PCB?
The Pi eliminator measures 70 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pi eliminator?
6 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pi eliminator design files?
From the wittend/pi-eliminator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pi eliminator design in my own project?
Yes, under the terms of its GPL-3.0 license, which wittend chose for the repository.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389