TachMetr-V2.0
Wladymyr1996·TachMetr-V2.0·TachMetr-V2/Tachmetr V2.kicad_pcb
About the TachMetr-V2.0 PCB
TachMetr-V2.0 is an open source AVR/Arduino PCB design by Wladymyr1996, published on GitHub. It is a 2-layer board measuring 80 × 80 mm, with 63 components from 15 distinct parts.
Its main chip is the ATMEGA8A-AU, from the AVR/Arduino family. Other key parts include the MAX7219. By type, the board carries 51 diodes, 3 capacitors, 3 resistors, 2 ICs, 2 connectors and 1 crystal.
From the project
The is a LED tachometer for my trike. Work on Atmega8A_AU and MAX7219.
Main components on the TachMetr-V2.0
TachMetr-V2.0 bill of materials (BOM)
63 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA8A-AU | TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | MAX7219 | SOIC-24W_7.5x15.4mm_Pitch1.27mm | U2 |
| 1 | 12MHz | Crystal_HC18-U_Vertical | Y1 |
| 1 | CONN_01X03 | Fan_Pin_Header_Straight_1x03 | J1 |
| 1 | USBASP | IDC_Header_Straight_10pins | J2 |
| 1 | CC56-12 | Cx56-12 | AFF1 |
| 48 | LED | LED_1206 | D1, D2, D3, D4, D5, D6, D7, D8 +40 |
| 1 | M7 | DO-214AC | D9 |
| 1 | 4148 | SOD-80 | D10 |
| 1 | C5V1 | SOD-80 | D11 |
| 1 | 1000uF | CP_Radial_D10.0mm_P5.00mm | C1 |
| 2 | 22pF | C_0603 | C2, C3 |
| 1 | 5K1 | R_0805 | R1 |
| 1 | 2K | R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R2 |
| 1 | 10K | R_0805 | R3 |
TachMetr-V2.0 design files
The KiCad project lives in the Wladymyr1996/TachMetr-V2.0 repository on GitHub; these links point at the commit this page was built from.
TachMetr-V2.0: common questions
What microcontroller does the TachMetr-V2.0 use?
The TachMetr-V2.0 is built around the ATMEGA8A-AU, from the AVR/Arduino family.
How big is the TachMetr-V2.0 PCB?
The TachMetr-V2.0 measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TachMetr-V2.0?
63 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the TachMetr-V2.0 design files?
From the Wladymyr1996/TachMetr-V2.0 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the TachMetr-V2.0 design in my own project?
The repository has no license, so all rights stay with Wladymyr1996. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TachMetr-V2.0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k