HardLabs

RS-485 to Feeders

wntrblm·jellyfish-and-starfish·hardware/rs485-feeder-adapter/rs485-feeder-adapter.kicad_pcb

RS-485 to Feeders PCB layout, top view — open source board by wntrblm

About the RS-485 to Feeders PCB

RS-485 to Feeders is an open source PCB design by wntrblm, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 40 × 40 mm, with 11 components from 10 distinct parts.

By type, the board carries 4 connectors, 3 diodes, 3 resistors and 1 capacitor.

From the project

Jellyfish and Starfish are control boards designed for use with the LumenPnP. Starfish controls the base of the machine including X & Y axes and pneumatics. Jellyfish controls the head of the machine including the Z, A, and B axes.

Jellyfish and Starfish are control boards designed for use with the LumenPnP. Starfish controls the base of the machine including X & Y axes and pneumatics. Jellyfish controls the head of the machine including the Z, A, and B axes.

Jellyfish and Starfish were made for Winterbloom's internal use cases and we don't have the resources to provide support. While we hope that this repository contains useful information for you, please note that issues and pull requests may go unanswered or may be closed without reply.

RS-485 to Feeders bill of materials (BOM)

11 components, 10 distinct parts.

QtyPartRefs
1
TB002-500-02BE
DC in
J101
1
TB002-500-02BE
DC thru
J102
1
RS-485
J103
1
Feeders
J104
1
SMAJ28CA
D101
1
PMEG3030EP,115
PMEG3030EP
D102
1
APT2012EC
24V
D103
1
865080653016, UWT1V221MNL1GS
100u
C101
2
CRGCQ0402F120R
120R
R101, R103
1
AC0603FR-075K1L
5k1
R102

RS-485 to Feeders design files

The KiCad project lives in the wntrblm/jellyfish-and-starfish repository on GitHub; these links point at the commit this page was built from.

RS-485 to Feeders: common questions

How big is the RS-485 to Feeders PCB?

The RS-485 to Feeders measures 40 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RS-485 to Feeders?

11 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the RS-485 to Feeders design files?

From the wntrblm/jellyfish-and-starfish repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RS-485 to Feeders design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in jellyfish-and-starfish