Solenoid driver
About the Solenoid driver PCB
Solenoid driver is an open source PCB design by wntrblm, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 40 × 30 mm, with 20 components from 13 distinct parts.
By type, the board carries 7 resistors, 6 diodes, 4 connectors, 2 transistors and 1 capacitor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Jellyfish and Starfish are control boards designed for use with the LumenPnP. Starfish controls the base of the machine including X & Y axes and pneumatics. Jellyfish controls the head of the machine including the Z, A, and B axes.
Jellyfish and Starfish are control boards designed for use with the LumenPnP. Starfish controls the base of the machine including X & Y axes and pneumatics. Jellyfish controls the head of the machine including the Z, A, and B axes.
Jellyfish and Starfish were made for Winterbloom's internal use cases and we don't have the resources to provide support. While we hope that this repository contains useful information for you, please note that issues and pull requests may go unanswered or may be closed without reply.
Solenoid driver bill of materials (BOM)
20 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | PMV40UN2R | SOT-23 | Q1, Q2 |
| 1 | DC IN | TerminalBlock_4UCON_1x02_P3.50mm_Horizontal | J1 |
| 1 | CONTROL | TerminalBlock_4UCON_1x02_P3.50mm_Horizontal | J2 |
| 1 | Solenoid A | TerminalBlock_4UCON_1x02_P3.50mm_Horizontal | J3 |
| 1 | Solenoid B | TerminalBlock_4UCON_1x02_P3.50mm_Horizontal | J4 |
| 2 | 30V 1A | D_SOD-128 | D1, D3 |
| 2 | APT2012EC A | LED_0805_Kingbright_APT2012 | D2, D4 |
| 1 | APT2012EC VDC | LED_0805_Kingbright_APT2012 | D5 |
| 1 | 30V 2A | D_SOD-128 | D6 |
| 1 | 10U | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 2 | 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4 |
| 2 | 100K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R5 |
| 3 | AC0603FR-075K1L 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R6, R7 |
Solenoid driver design files
The KiCad project lives in the wntrblm/jellyfish-and-starfish repository on GitHub; these links point at the commit this page was built from.
Solenoid driver: common questions
How big is the Solenoid driver PCB?
The Solenoid driver measures 40 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Solenoid driver?
20 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Solenoid driver design files?
From the wntrblm/jellyfish-and-starfish repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Solenoid driver design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in jellyfish-and-starfish
RP2040/RP2350Starfish
100 × 100 mm220 parts4LCC-BY-NC-4.0111
RP2040/RP2350Jellyfish
80 × 70 mm142 parts4LCC-BY-NC-4.0111
Jellyfish Tailboard
98 × 68 mm21 parts2LCC-BY-NC-4.0111
MOSFET driver
40 × 30 mm13 parts2LCC-BY-NC-4.0111
RS-485 to Feeders
40 × 40 mm11 parts2LCC-BY-NC-4.0111
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979