MOSFET driver
About the MOSFET driver PCB
MOSFET driver is an open source PCB design by wntrblm, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 40 × 30 mm, with 13 components from 12 distinct parts.
By type, the board carries 4 diodes, 4 resistors, 3 connectors, 1 transistor and 1 capacitor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Jellyfish and Starfish are control boards designed for use with the LumenPnP. Starfish controls the base of the machine including X & Y axes and pneumatics. Jellyfish controls the head of the machine including the Z, A, and B axes.
Jellyfish and Starfish are control boards designed for use with the LumenPnP. Starfish controls the base of the machine including X & Y axes and pneumatics. Jellyfish controls the head of the machine including the Z, A, and B axes.
Jellyfish and Starfish were made for Winterbloom's internal use cases and we don't have the resources to provide support. While we hope that this repository contains useful information for you, please note that issues and pull requests may go unanswered or may be closed without reply.
MOSFET driver bill of materials (BOM)
13 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PSMN011-30YLC | LFPAK56 | Q1 |
| 1 | DC IN | TerminalBlock_4UCON_1x02_P3.50mm_Horizontal | J1 |
| 1 | CONTROL | TerminalBlock_4UCON_1x02_P3.50mm_Horizontal | J2 |
| 1 | Motor | TerminalBlock_4UCON_1x02_P3.50mm_Horizontal | J3 |
| 1 | 30V 1A | D_SOD-128 | D1 |
| 1 | APT2012EC A | LED_0805_Kingbright_APT2012 | D2 |
| 1 | APT2012EC VDC | LED_0805_Kingbright_APT2012 | D5 |
| 1 | 30V 2A | D_SOD-128 | D6 |
| 1 | 100U | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1 |
| 1 | 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 100K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 2 | AC0603FR-075K1L 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R7 |
MOSFET driver design files
The KiCad project lives in the wntrblm/jellyfish-and-starfish repository on GitHub; these links point at the commit this page was built from.
MOSFET driver: common questions
How big is the MOSFET driver PCB?
The MOSFET driver measures 40 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MOSFET driver?
13 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the MOSFET driver design files?
From the wntrblm/jellyfish-and-starfish repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MOSFET driver design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in jellyfish-and-starfish
RP2040/RP2350Starfish
100 × 100 mm220 parts4LCC-BY-NC-4.0111
RP2040/RP2350Jellyfish
80 × 70 mm142 parts4LCC-BY-NC-4.0111
Jellyfish Tailboard
98 × 68 mm21 parts2LCC-BY-NC-4.0111
Solenoid driver
40 × 30 mm20 parts2LCC-BY-NC-4.0111
RS-485 to Feeders
40 × 40 mm11 parts2LCC-BY-NC-4.0111
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979