Sm board
WPISmartmouse·Smartmouse_pcbs_2018·teensy_board/sm_board.kicad_pcb
About the Sm board
Sm board is an open source NXP PCB design by WPISmartmouse, published on GitHub. It is a 2-layer board measuring 64 × 54.5 mm, with 52 components from 18 distinct parts.
Its main chip is the Teensy3.6, from the NXP family. Other key parts include the DRV8833RTYT and tps82130. By type, the board carries 14 resistors, 13 connectors, 12 capacitors, 8 diodes, 3 ICs and 2 switches.
From the project
- Schematics are included as pdfs - BOM is inclded as an excel spreadsheet (some items are approximate) - General maze solving methodology is described below
- Schematics are included as pdfs - BOM is inclded as an excel spreadsheet (some items are approximate) - General maze solving methodology is described below
We use a flood-fill algorithm to solve the maze. We explore by taking the optimistic assuming there are no walls other than the ones we have observed up until that point, and replan our next step at each cell. We can return once the center is reached and continue to explore for faster routes as we traverse more of the maze until time runs out or the shortest path is found.
Main components on the Sm board
Sm board bill of materials (BOM)
52 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8833RTYT | WQFN-16-1EP_4x4mm_Pitch0.65mm | IC1 |
| 1 | Teensy3.6 | Teensy35_36_custom | U1 |
| 1 | tps82130 | tps82130 | U3 |
| 2 | Conn_01x06 | Molex_CLIK-Mate_502386-0670_1x06_P1.25mm_Horizontal | J1, J3 |
| 1 | Conn_01x06 | Pin_Header_Straight_1x06_Pitch2.54mm | J2 |
| 7 | Conn_01x03 | Molex_CLIK-Mate_502382-0370_1x03_P1.25mm_Vertical | J4, J5, J6, J7, J8, J9, J10 |
| 1 | CONN_01X02 | Pin_Header_Straight_1x02_Pitch2.54mm | J11 |
| 2 | Conn_01x02 | Molex_CLIK-Mate_502494-0270_1x02_P2.00mm_Horizontal | J13, J14 |
| 2 | MX1A | MX1A | S0, S1 |
| 8 | LED | LED_0603 | D0, D1, D2, D3, D4, D5, D6, D7 |
| 9 | C10uF | C_0402 | C0, C1, C2, C3, C4, C5, C6, C7 +1 |
| 1 | 2.2uC | C_0402 | C9 |
| 1 | 0.01uC | C_0402 | C10 |
| 1 | 10uC | C_0402 | C11 |
| 1 | R78.7K | R_0402 | R0 |
| 1 | R15K | R_0402 | R1 |
| 4 | R | R_0402 | R2, R11, R12, R13 |
| 8 | R150 | R_0402 | R3, R4, R5, R6, R7, R8, R9, R10 |
Sm board design files
The KiCad project lives in the WPISmartmouse/Smartmouse_pcbs_2018 repository on GitHub; these links point at the commit this page was built from.
Sm board: common questions
What microcontroller does the Sm board use?
The Sm board is built around the Teensy3.6, from the NXP family.
How big is the Sm board?
The Sm board measures 64 × 54.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sm board?
52 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sm board design files?
From the WPISmartmouse/Smartmouse_pcbs_2018 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Sm board design in my own project?
The repository has no license, so all rights stay with WPISmartmouse. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sm board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in Smartmouse_pcbs_2018
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532