17 open source boards using the TPS82130
Real designs built with the TPS82130, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Esphome lg controller
JanM321
22.9 × 50.8 mm16 parts4L0BSD289STM32
Ovc
osrf
230 × 56 mm379 parts6LApache-2.0207NXP
Horizon
Horizon-Avionics
68.8 × 90.3 mm168 parts4LNo license17ESP32
Bigtolt
LJBoxx
111.1 × 130.1 mm396 parts6LCERN-OHL-S-2.05Control
Jochen0x90h
70 × 76 mm78 parts2LCC-BY-NC-4.03ESP32
Iotrain
klaus-liebler
19 × 13.8 mm71 parts2LMIT1STM32
H723zgt6
shydql
73.9 × 63.8 mm124 parts4LGPL-3.00Microchip SAM
Vanguard new
SpacePicklesRocketry
50.3 × 40 mm85 parts4LNo license0STM32
Black magic
GKevinLi
50.9 × 43.8 mm70 parts4LNo license0Cartouche eclair proto
opencorp2030-ctrl
36 × 46 mm70 parts4LCERN-OHL-S-2.00NXP
Sm board
WPISmartmouse
64 × 54.5 mm52 parts2LNo license0STM32
LedControl
Jochen0x90h
64 × 39.5 mm48 parts2LMIT0NXP
Board 17
WPISmartmouse
70.5 × 42.6 mm45 parts2LNo license0ESP32
Esp32-drone flight controller
mohammedtalha15
54 × 34 mm35 parts2LNo license0ESP32
Babys first
GKevinLi
54 × 34 mm35 parts2LNo license0Mobof
osrf
110.5 × 50 mm225 parts6LApache-2.0207POWER-STATION
shydql
40 × 40 mm58 parts2LGPL-3.00
How designs wire the TPS82130
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the TPS82130 connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 14 of 15 designs, most often 10 µF (then 47 µF).
- The VOUT pins have a decoupling capacitor on 14 of 15 designs, most often 22 µF (then 1 µF).
- The FB pin has a resistor to GND on 14 of 15 designs, most often 100 kΩ (then 10 kΩ).
- The SS/TR pin has a capacitor to GND on 11 of 15 designs, most often 3.3 nF (then 4.7 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ENpin 1 | Connected to: 12V 67% · a signal 33% | — |
| VINpin 2 | Connected to: 12V 80% · a signal 20% |
|
| GNDpin 3, 9 | Connected to: GND 100% | — |
| VOUTpin 4, 5 | Connected to: 3.3V 60% · a signal 40% |
|
| FBpin 6 | Connected to: Signal 100% |
|
| PGpin 7 | Connected to: Not connected 60% · a signal 40% | — |
| SS/TRpin 8 | Connected to: Signal 73% · not connected 27% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esphome lg controller by JanM321, Ovc by osrf, Horizon by Horizon-Avionics and Bigtolt by LJBoxx.
The TPS82130 in open source designs
The gallery holds 17 open source boards using the TPS82130 from 15 GitHub repositories; a typical one measures about 64 × 46 mm and carries around 70 components.
53% use four copper layers or more, and 53% carry an open source license.
The most starred is Esphome lg controller by JanM321.
Parts used alongside the TPS82130
Microcontrollers on boards using the TPS82130
What boards using the TPS82130 are built for
TPS82130: common questions
Where can I find a TPS82130 reference design?
Each of the 17 boards on this page is a real design using the TPS82130. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TPS82130 VIN pin?
The VIN pin has a decoupling capacitor on 14 of 15 designs, most often 10 µF (then 47 µF). Counted from the KiCad layouts of 15 open source designs using the TPS82130.
What decoupling capacitors do designs use on the TPS82130 VOUT pin?
The VOUT pins have a decoupling capacitor on 14 of 15 designs, most often 22 µF (then 1 µF). Counted from the KiCad layouts of 15 open source designs using the TPS82130.
What resistor goes on the TPS82130 FB pin?
The FB pin has a resistor to GND on 14 of 15 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 15 open source designs using the TPS82130.
What parts are used alongside the TPS82130?
The TLV76133DCY, USBLC6-2P6, AP2112K-3.3, BME680 and ESP32-S3-WROOM-1 appear in the most repositories here.
Which microcontrollers do boards using the TPS82130 use?
Most are built on ESP32 (4), STM32 (4), NXP (3) and Microchip SAM (1).
How big is a typical board using the TPS82130?
The median is 64 × 46 mm, and 47% are two-layer designs.
What is the most popular open source board using the TPS82130?
By GitHub stars, Esphome lg controller by JanM321, with 289 stars.
Can I simulate one of these boards using the TPS82130 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.