Magrat v0
WRansohoff·Magrat_v0
About the Magrat v0 PCB
Magrat v0 is an open source STM32 PCB design by WRansohoff, published on GitHub under the MIT license. It is a 4-layer board measuring 64.1 × 72.4 mm, with 78 components from 38 distinct parts.
Its main chip is the STM32H753IITx, from the STM32 family. Other key parts include the W25Q128, MT48LC16M16, LDO and NS2009. By type, the board carries 36 capacitors, 20 resistors, 8 connectors, 5 ICs, 4 diodes and 2 crystals.
From the project
Design files and test firmwares for a single-core STM32H7 board with extra RAM and a side of Flash.
NOTE: This is an early revision of a board which I am in the process of revising. I'm publishing the design files for the sake of sharing now that I've tested many (but not all) of the board's main features, but there are plenty of improvements which should be made, and you should not treat this as a solid reference implementation or a finalized production-ready design.

Main components on the Magrat v0
Magrat v0 bill of materials (BOM)
78 components, 38 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H753IITx | LQFP-176_24x24mm_P0.5mm | U1 |
| 1 | W25Q128 | SOIC-8_5.23x5.23mm_P1.27mm | U2 |
| 1 | MT48LC16M16 | TSOP-II-54_22.2x10.16mm_P0.8mm | U3 |
| 1 | LDO | SOT-223-3_TabPin2 | U4 |
| 1 | NS2009 | MSOP-10_3x3mm_P0.5mm | U5 |
| 1 | AO3400 | SOT-23 | Q1 |
| 1 | HSE | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | LSE | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | Prog | PinSocket_1x05_P2.54mm_Horizontal | J1 |
| 1 | USB | MyMicroUSB | J2 |
| 1 | uSD | microSD_1051620001 | J3 |
| 1 | TFT | FPC_50p_0.5mm | J4 |
| 1 | UART | PinSocket_1x05_P2.54mm_Horizontal | J5 |
| 1 | I2C | PinSocket_1x05_P2.54mm_Horizontal | J6 |
| 1 | SPI | PinSocket_1x07_P2.54mm_Horizontal | J7 |
| 1 | GPIO | PinSocket_1x08_P2.54mm_Horizontal | J8 |
| 1 | Reset | button_jlcpcb | S1 |
| 1 | Button | button_jlcpcb | S2 |
| 1 | TVS | SOT-363_SC-70-6 | D1 |
| 1 | LED1 | LED_0603_1608Metric | D2 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED2 | LED_0603_1608Metric | D3 |
| 1 | LED3 | LED_0603_1608Metric | D4 |
| 2 | 10u | CP_EIA-3216-10_Kemet-I | C1, C2 |
| 23 | 100n | C_0402_1005Metric | C3, C4, C5, C6, C7, C8, C9, C10 +15 |
| 2 | 2u2 | C_0603_1608Metric | C11, C12 |
| 2 | 20p | C_0402_1005Metric | C13, C14 |
| 2 | 5p | C_0402_1005Metric | C15, C16 |
| 3 | 10n | C_0402_1005Metric | C17, C20, C36 |
| 2 | 1u | C_0402_1005Metric | C18, C19 |
| 4 | 10K | R_0402_1005Metric | R1, R12, R13, R19 |
| 3 | 47K | R_0402_1005Metric | R2, R20, R21 |
| 1 | 4K7 | R_0402_1005Metric | R3 |
| 4 | 1K | R_0402_1005Metric | R4, R5, R6, R14 |
| 1 | 0x92 | R_0402_1005Metric | R7 |
| 1 | 0x90 | R_0402_1005Metric | R8 |
| 1 | HSER | R_0402_1005Metric | R22 |
| 1 | LSER | R_0402_1005Metric | R23 |
| 4 | 10K | R_Array_Concave_4x0402 | RN1, RN2, RN3, RN4 |
Magrat v0 design files
The KiCad project lives in the WRansohoff/Magrat_v0 repository on GitHub; these links point at the commit this page was built from.
- Layoutstm32_linux.kicad_pcb
Magrat v0: common questions
What microcontroller does the Magrat v0 use?
The Magrat v0 is built around the STM32H753IITx, from the STM32 family.
How big is the Magrat v0 PCB?
The Magrat v0 measures 64.1 × 72.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Magrat v0?
78 components, from 38 distinct parts. The full bill of materials is listed on this page.
Where can I download the Magrat v0 design files?
From the WRansohoff/Magrat_v0 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Magrat v0 design in my own project?
Yes, under the terms of its MIT license, which WRansohoff chose for the repository.
Can I test firmware for the Magrat v0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k